comparison Doxyfile @ 0:0ce5cc452d02

initial version
author Carl Byington <carl@five-ten-sg.com>
date Thu, 22 May 2014 10:41:19 -0700
parents
children
comparison
equal deleted inserted replaced
-1:000000000000 0:0ce5cc452d02
1 # Doxyfile 1.6.1
2
3 # This file describes the settings to be used by the documentation system
4 # doxygen (www.doxygen.org) for a project
5 #
6 # All text after a hash (#) is considered a comment and will be ignored
7 # The format is:
8 # TAG = value [value, ...]
9 # For lists items can also be appended using:
10 # TAG += value [value, ...]
11 # Values that contain spaces should be placed between quotes (" ")
12
13 #---------------------------------------------------------------------------
14 # Project related configuration options
15 #---------------------------------------------------------------------------
16
17 # This tag specifies the encoding used for all characters in the config file
18 # that follow. The default is UTF-8 which is also the encoding used for all
19 # text before the first occurrence of this tag. Doxygen uses libiconv (or the
20 # iconv built into libc) for the transcoding. See
21 # http://www.gnu.org/software/libiconv for the list of possible encodings.
22
23 DOXYFILE_ENCODING = UTF-8
24
25 # The PROJECT_NAME tag is a single word (or a sequence of words surrounded
26 # by quotes) that should identify the project.
27
28 PROJECT_NAME = 510 Connectbot
29
30 # The PROJECT_NUMBER tag can be used to enter a project or revision number.
31 # This could be handy for archiving the generated documentation or
32 # if some version control system is used.
33
34 PROJECT_NUMBER =
35
36 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
37 # base path where the generated documentation will be put.
38 # If a relative path is entered, it will be relative to the location
39 # where doxygen was started. If left blank the current directory will be used.
40
41 OUTPUT_DIRECTORY = doc
42
43 # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
44 # 4096 sub-directories (in 2 levels) under the output directory of each output
45 # format and will distribute the generated files over these directories.
46 # Enabling this option can be useful when feeding doxygen a huge amount of
47 # source files, where putting all generated files in the same directory would
48 # otherwise cause performance problems for the file system.
49
50 CREATE_SUBDIRS = NO
51
52 # The OUTPUT_LANGUAGE tag is used to specify the language in which all
53 # documentation generated by doxygen is written. Doxygen will use this
54 # information to generate all constant output in the proper language.
55 # The default language is English, other supported languages are:
56 # Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
57 # Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
58 # Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
59 # messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
60 # Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak,
61 # Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
62
63 OUTPUT_LANGUAGE = English
64
65 # If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
66 # include brief member descriptions after the members that are listed in
67 # the file and class documentation (similar to JavaDoc).
68 # Set to NO to disable this.
69
70 BRIEF_MEMBER_DESC = YES
71
72 # If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
73 # the brief description of a member or function before the detailed description.
74 # Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
75 # brief descriptions will be completely suppressed.
76
77 REPEAT_BRIEF = YES
78
79 # This tag implements a quasi-intelligent brief description abbreviator
80 # that is used to form the text in various listings. Each string
81 # in this list, if found as the leading text of the brief description, will be
82 # stripped from the text and the result after processing the whole list, is
83 # used as the annotated text. Otherwise, the brief description is used as-is.
84 # If left blank, the following values are used ("$name" is automatically
85 # replaced with the name of the entity): "The $name class" "The $name widget"
86 # "The $name file" "is" "provides" "specifies" "contains"
87 # "represents" "a" "an" "the"
88
89 ABBREVIATE_BRIEF =
90
91 # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
92 # Doxygen will generate a detailed section even if there is only a brief
93 # description.
94
95 ALWAYS_DETAILED_SEC = NO
96
97 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
98 # inherited members of a class in the documentation of that class as if those
99 # members were ordinary class members. Constructors, destructors and assignment
100 # operators of the base classes will not be shown.
101
102 INLINE_INHERITED_MEMB = NO
103
104 # If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
105 # path before files name in the file list and in the header files. If set
106 # to NO the shortest path that makes the file name unique will be used.
107
108 FULL_PATH_NAMES = YES
109
110 # If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
111 # can be used to strip a user-defined part of the path. Stripping is
112 # only done if one of the specified strings matches the left-hand part of
113 # the path. The tag can be used to show relative paths in the file list.
114 # If left blank the directory from which doxygen is run is used as the
115 # path to strip.
116
117 STRIP_FROM_PATH =
118
119 # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
120 # the path mentioned in the documentation of a class, which tells
121 # the reader which header file to include in order to use a class.
122 # If left blank only the name of the header file containing the class
123 # definition is used. Otherwise one should specify the include paths that
124 # are normally passed to the compiler using the -I flag.
125
126 STRIP_FROM_INC_PATH =
127
128 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
129 # (but less readable) file names. This can be useful is your file systems
130 # doesn't support long names like on DOS, Mac, or CD-ROM.
131
132 SHORT_NAMES = NO
133
134 # If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
135 # will interpret the first line (until the first dot) of a JavaDoc-style
136 # comment as the brief description. If set to NO, the JavaDoc
137 # comments will behave just like regular Qt-style comments
138 # (thus requiring an explicit @brief command for a brief description.)
139
140 JAVADOC_AUTOBRIEF = NO
141
142 # If the QT_AUTOBRIEF tag is set to YES then Doxygen will
143 # interpret the first line (until the first dot) of a Qt-style
144 # comment as the brief description. If set to NO, the comments
145 # will behave just like regular Qt-style comments (thus requiring
146 # an explicit \brief command for a brief description.)
147
148 QT_AUTOBRIEF = NO
149
150 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
151 # treat a multi-line C++ special comment block (i.e. a block of //! or ///
152 # comments) as a brief description. This used to be the default behaviour.
153 # The new default is to treat a multi-line C++ comment block as a detailed
154 # description. Set this tag to YES if you prefer the old behaviour instead.
155
156 MULTILINE_CPP_IS_BRIEF = NO
157
158 # If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
159 # member inherits the documentation from any documented member that it
160 # re-implements.
161
162 INHERIT_DOCS = YES
163
164 # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
165 # a new page for each member. If set to NO, the documentation of a member will
166 # be part of the file/class/namespace that contains it.
167
168 SEPARATE_MEMBER_PAGES = NO
169
170 # The TAB_SIZE tag can be used to set the number of spaces in a tab.
171 # Doxygen uses this value to replace tabs by spaces in code fragments.
172
173 TAB_SIZE = 4
174
175 # This tag can be used to specify a number of aliases that acts
176 # as commands in the documentation. An alias has the form "name=value".
177 # For example adding "sideeffect=\par Side Effects:\n" will allow you to
178 # put the command \sideeffect (or @sideeffect) in the documentation, which
179 # will result in a user-defined paragraph with heading "Side Effects:".
180 # You can put \n's in the value part of an alias to insert newlines.
181
182 ALIASES =
183
184 # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
185 # sources only. Doxygen will then generate output that is more tailored for C.
186 # For instance, some of the names that are used will be different. The list
187 # of all members will be omitted, etc.
188
189 OPTIMIZE_OUTPUT_FOR_C = NO
190
191 # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
192 # sources only. Doxygen will then generate output that is more tailored for
193 # Java. For instance, namespaces will be presented as packages, qualified
194 # scopes will look different, etc.
195
196 OPTIMIZE_OUTPUT_JAVA = NO
197
198 # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
199 # sources only. Doxygen will then generate output that is more tailored for
200 # Fortran.
201
202 OPTIMIZE_FOR_FORTRAN = NO
203
204 # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
205 # sources. Doxygen will then generate output that is tailored for
206 # VHDL.
207
208 OPTIMIZE_OUTPUT_VHDL = NO
209
210 # Doxygen selects the parser to use depending on the extension of the files it parses.
211 # With this tag you can assign which parser to use for a given extension.
212 # Doxygen has a built-in mapping, but you can override or extend it using this tag.
213 # The format is ext=language, where ext is a file extension, and language is one of
214 # the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP,
215 # Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat
216 # .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran),
217 # use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
218
219 EXTENSION_MAPPING =
220
221 # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
222 # to include (a tag file for) the STL sources as input, then you should
223 # set this tag to YES in order to let doxygen match functions declarations and
224 # definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
225 # func(std::string) {}). This also make the inheritance and collaboration
226 # diagrams that involve STL classes more complete and accurate.
227
228 BUILTIN_STL_SUPPORT = NO
229
230 # If you use Microsoft's C++/CLI language, you should set this option to YES to
231 # enable parsing support.
232
233 CPP_CLI_SUPPORT = NO
234
235 # Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
236 # Doxygen will parse them like normal C++ but will assume all classes use public
237 # instead of private inheritance when no explicit protection keyword is present.
238
239 SIP_SUPPORT = NO
240
241 # For Microsoft's IDL there are propget and propput attributes to indicate getter
242 # and setter methods for a property. Setting this option to YES (the default)
243 # will make doxygen to replace the get and set methods by a property in the
244 # documentation. This will only work if the methods are indeed getting or
245 # setting a simple type. If this is not the case, or you want to show the
246 # methods anyway, you should set this option to NO.
247
248 IDL_PROPERTY_SUPPORT = YES
249
250 # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
251 # tag is set to YES, then doxygen will reuse the documentation of the first
252 # member in the group (if any) for the other members of the group. By default
253 # all members of a group must be documented explicitly.
254
255 DISTRIBUTE_GROUP_DOC = NO
256
257 # Set the SUBGROUPING tag to YES (the default) to allow class member groups of
258 # the same type (for instance a group of public functions) to be put as a
259 # subgroup of that type (e.g. under the Public Functions section). Set it to
260 # NO to prevent subgrouping. Alternatively, this can be done per class using
261 # the \nosubgrouping command.
262
263 SUBGROUPING = YES
264
265 # When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
266 # is documented as struct, union, or enum with the name of the typedef. So
267 # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
268 # with name TypeT. When disabled the typedef will appear as a member of a file,
269 # namespace, or class. And the struct will be named TypeS. This can typically
270 # be useful for C code in case the coding convention dictates that all compound
271 # types are typedef'ed and only the typedef is referenced, never the tag name.
272
273 TYPEDEF_HIDES_STRUCT = NO
274
275 # The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
276 # determine which symbols to keep in memory and which to flush to disk.
277 # When the cache is full, less often used symbols will be written to disk.
278 # For small to medium size projects (<1000 input files) the default value is
279 # probably good enough. For larger projects a too small cache size can cause
280 # doxygen to be busy swapping symbols to and from disk most of the time
281 # causing a significant performance penality.
282 # If the system has enough physical memory increasing the cache will improve the
283 # performance by keeping more symbols in memory. Note that the value works on
284 # a logarithmic scale so increasing the size by one will rougly double the
285 # memory usage. The cache size is given by this formula:
286 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
287 # corresponding to a cache size of 2^16 = 65536 symbols
288
289 SYMBOL_CACHE_SIZE = 0
290
291 #---------------------------------------------------------------------------
292 # Build related configuration options
293 #---------------------------------------------------------------------------
294
295 # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
296 # documentation are documented, even if no documentation was available.
297 # Private class members and static file members will be hidden unless
298 # the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
299
300 EXTRACT_ALL = NO
301
302 # If the EXTRACT_PRIVATE tag is set to YES all private members of a class
303 # will be included in the documentation.
304
305 EXTRACT_PRIVATE = NO
306
307 # If the EXTRACT_STATIC tag is set to YES all static members of a file
308 # will be included in the documentation.
309
310 EXTRACT_STATIC = NO
311
312 # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
313 # defined locally in source files will be included in the documentation.
314 # If set to NO only classes defined in header files are included.
315
316 EXTRACT_LOCAL_CLASSES = YES
317
318 # This flag is only useful for Objective-C code. When set to YES local
319 # methods, which are defined in the implementation section but not in
320 # the interface are included in the documentation.
321 # If set to NO (the default) only methods in the interface are included.
322
323 EXTRACT_LOCAL_METHODS = NO
324
325 # If this flag is set to YES, the members of anonymous namespaces will be
326 # extracted and appear in the documentation as a namespace called
327 # 'anonymous_namespace{file}', where file will be replaced with the base
328 # name of the file that contains the anonymous namespace. By default
329 # anonymous namespace are hidden.
330
331 EXTRACT_ANON_NSPACES = NO
332
333 # If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
334 # undocumented members of documented classes, files or namespaces.
335 # If set to NO (the default) these members will be included in the
336 # various overviews, but no documentation section is generated.
337 # This option has no effect if EXTRACT_ALL is enabled.
338
339 HIDE_UNDOC_MEMBERS = NO
340
341 # If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
342 # undocumented classes that are normally visible in the class hierarchy.
343 # If set to NO (the default) these classes will be included in the various
344 # overviews. This option has no effect if EXTRACT_ALL is enabled.
345
346 HIDE_UNDOC_CLASSES = NO
347
348 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
349 # friend (class|struct|union) declarations.
350 # If set to NO (the default) these declarations will be included in the
351 # documentation.
352
353 HIDE_FRIEND_COMPOUNDS = NO
354
355 # If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
356 # documentation blocks found inside the body of a function.
357 # If set to NO (the default) these blocks will be appended to the
358 # function's detailed documentation block.
359
360 HIDE_IN_BODY_DOCS = NO
361
362 # The INTERNAL_DOCS tag determines if documentation
363 # that is typed after a \internal command is included. If the tag is set
364 # to NO (the default) then the documentation will be excluded.
365 # Set it to YES to include the internal documentation.
366
367 INTERNAL_DOCS = NO
368
369 # If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
370 # file names in lower-case letters. If set to YES upper-case letters are also
371 # allowed. This is useful if you have classes or files whose names only differ
372 # in case and if your file system supports case sensitive file names. Windows
373 # and Mac users are advised to set this option to NO.
374
375 CASE_SENSE_NAMES = YES
376
377 # If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
378 # will show members with their full class and namespace scopes in the
379 # documentation. If set to YES the scope will be hidden.
380
381 HIDE_SCOPE_NAMES = NO
382
383 # If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
384 # will put a list of the files that are included by a file in the documentation
385 # of that file.
386
387 SHOW_INCLUDE_FILES = YES
388
389 # If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
390 # is inserted in the documentation for inline members.
391
392 INLINE_INFO = YES
393
394 # If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
395 # will sort the (detailed) documentation of file and class members
396 # alphabetically by member name. If set to NO the members will appear in
397 # declaration order.
398
399 SORT_MEMBER_DOCS = YES
400
401 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
402 # brief documentation of file, namespace and class members alphabetically
403 # by member name. If set to NO (the default) the members will appear in
404 # declaration order.
405
406 SORT_BRIEF_DOCS = NO
407
408 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
409
410 SORT_MEMBERS_CTORS_1ST = NO
411
412 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
413 # hierarchy of group names into alphabetical order. If set to NO (the default)
414 # the group names will appear in their defined order.
415
416 SORT_GROUP_NAMES = NO
417
418 # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
419 # sorted by fully-qualified names, including namespaces. If set to
420 # NO (the default), the class list will be sorted only by class name,
421 # not including the namespace part.
422 # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
423 # Note: This option applies only to the class list, not to the
424 # alphabetical list.
425
426 SORT_BY_SCOPE_NAME = NO
427
428 # The GENERATE_TODOLIST tag can be used to enable (YES) or
429 # disable (NO) the todo list. This list is created by putting \todo
430 # commands in the documentation.
431
432 GENERATE_TODOLIST = YES
433
434 # The GENERATE_TESTLIST tag can be used to enable (YES) or
435 # disable (NO) the test list. This list is created by putting \test
436 # commands in the documentation.
437
438 GENERATE_TESTLIST = YES
439
440 # The GENERATE_BUGLIST tag can be used to enable (YES) or
441 # disable (NO) the bug list. This list is created by putting \bug
442 # commands in the documentation.
443
444 GENERATE_BUGLIST = YES
445
446 # The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
447 # disable (NO) the deprecated list. This list is created by putting
448 # \deprecated commands in the documentation.
449
450 GENERATE_DEPRECATEDLIST= YES
451
452 # The ENABLED_SECTIONS tag can be used to enable conditional
453 # documentation sections, marked by \if sectionname ... \endif.
454
455 ENABLED_SECTIONS =
456
457 # The MAX_INITIALIZER_LINES tag determines the maximum number of lines
458 # the initial value of a variable or define consists of for it to appear in
459 # the documentation. If the initializer consists of more lines than specified
460 # here it will be hidden. Use a value of 0 to hide initializers completely.
461 # The appearance of the initializer of individual variables and defines in the
462 # documentation can be controlled using \showinitializer or \hideinitializer
463 # command in the documentation regardless of this setting.
464
465 MAX_INITIALIZER_LINES = 30
466
467 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated
468 # at the bottom of the documentation of classes and structs. If set to YES the
469 # list will mention the files that were used to generate the documentation.
470
471 SHOW_USED_FILES = YES
472
473 # If the sources in your project are distributed over multiple directories
474 # then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
475 # in the documentation. The default is NO.
476
477 SHOW_DIRECTORIES = NO
478
479 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
480 # This will remove the Files entry from the Quick Index and from the
481 # Folder Tree View (if specified). The default is YES.
482
483 SHOW_FILES = YES
484
485 # Set the SHOW_NAMESPACES tag to NO to disable the generation of the
486 # Namespaces page.
487 # This will remove the Namespaces entry from the Quick Index
488 # and from the Folder Tree View (if specified). The default is YES.
489
490 SHOW_NAMESPACES = YES
491
492 # The FILE_VERSION_FILTER tag can be used to specify a program or script that
493 # doxygen should invoke to get the current version for each file (typically from
494 # the version control system). Doxygen will invoke the program by executing (via
495 # popen()) the command <command> <input-file>, where <command> is the value of
496 # the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
497 # provided by doxygen. Whatever the program writes to standard output
498 # is used as the file version. See the manual for examples.
499
500 FILE_VERSION_FILTER =
501
502 # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by
503 # doxygen. The layout file controls the global structure of the generated output files
504 # in an output format independent way. The create the layout file that represents
505 # doxygen's defaults, run doxygen with the -l option. You can optionally specify a
506 # file name after the option, if omitted DoxygenLayout.xml will be used as the name
507 # of the layout file.
508
509 LAYOUT_FILE =
510
511 #---------------------------------------------------------------------------
512 # configuration options related to warning and progress messages
513 #---------------------------------------------------------------------------
514
515 # The QUIET tag can be used to turn on/off the messages that are generated
516 # by doxygen. Possible values are YES and NO. If left blank NO is used.
517
518 QUIET = NO
519
520 # The WARNINGS tag can be used to turn on/off the warning messages that are
521 # generated by doxygen. Possible values are YES and NO. If left blank
522 # NO is used.
523
524 WARNINGS = YES
525
526 # If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
527 # for undocumented members. If EXTRACT_ALL is set to YES then this flag will
528 # automatically be disabled.
529
530 WARN_IF_UNDOCUMENTED = NO
531
532 # If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
533 # potential errors in the documentation, such as not documenting some
534 # parameters in a documented function, or documenting parameters that
535 # don't exist or using markup commands wrongly.
536
537 WARN_IF_DOC_ERROR = YES
538
539 # This WARN_NO_PARAMDOC option can be abled to get warnings for
540 # functions that are documented, but have no documentation for their parameters
541 # or return value. If set to NO (the default) doxygen will only warn about
542 # wrong or incomplete parameter documentation, but not about the absence of
543 # documentation.
544
545 WARN_NO_PARAMDOC = NO
546
547 # The WARN_FORMAT tag determines the format of the warning messages that
548 # doxygen can produce. The string should contain the $file, $line, and $text
549 # tags, which will be replaced by the file and line number from which the
550 # warning originated and the warning text. Optionally the format may contain
551 # $version, which will be replaced by the version of the file (if it could
552 # be obtained via FILE_VERSION_FILTER)
553
554 WARN_FORMAT = "$file:$line: $text"
555
556 # The WARN_LOGFILE tag can be used to specify a file to which warning
557 # and error messages should be written. If left blank the output is written
558 # to stderr.
559
560 WARN_LOGFILE =
561
562 #---------------------------------------------------------------------------
563 # configuration options related to the input files
564 #---------------------------------------------------------------------------
565
566 # The INPUT tag can be used to specify the files and/or directories that contain
567 # documented source files. You may enter file names like "myfile.cpp" or
568 # directories like "/usr/src/myproject". Separate the files or directories
569 # with spaces.
570
571 INPUT = .
572
573 # This tag can be used to specify the character encoding of the source files
574 # that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
575 # also the default input encoding. Doxygen uses libiconv (or the iconv built
576 # into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
577 # the list of possible encodings.
578
579 INPUT_ENCODING = UTF-8
580
581 # If the value of the INPUT tag contains directories, you can use the
582 # FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
583 # and *.h) to filter out the source-files in the directories. If left
584 # blank the following patterns are tested:
585 # *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx
586 # *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90
587
588 FILE_PATTERNS =
589
590 # The RECURSIVE tag can be used to turn specify whether or not subdirectories
591 # should be searched for input files as well. Possible values are YES and NO.
592 # If left blank NO is used.
593
594 RECURSIVE = YES
595
596 # The EXCLUDE tag can be used to specify files and/or directories that should
597 # excluded from the INPUT source files. This way you can easily exclude a
598 # subdirectory from a directory tree whose root is specified with the INPUT tag.
599
600 EXCLUDE = doc .hg
601
602 # The EXCLUDE_SYMLINKS tag can be used select whether or not files or
603 # directories that are symbolic links (a Unix filesystem feature) are excluded
604 # from the input.
605
606 EXCLUDE_SYMLINKS = NO
607
608 # If the value of the INPUT tag contains directories, you can use the
609 # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
610 # certain files from those directories. Note that the wildcards are matched
611 # against the file with absolute path, so to exclude all test directories
612 # for example use the pattern */test/*
613
614 EXCLUDE_PATTERNS =
615
616 # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
617 # (namespaces, classes, functions, etc.) that should be excluded from the
618 # output. The symbol name can be a fully qualified name, a word, or if the
619 # wildcard * is used, a substring. Examples: ANamespace, AClass,
620 # AClass::ANamespace, ANamespace::*Test
621
622 EXCLUDE_SYMBOLS =
623
624 # The EXAMPLE_PATH tag can be used to specify one or more files or
625 # directories that contain example code fragments that are included (see
626 # the \include command).
627
628 EXAMPLE_PATH =
629
630 # If the value of the EXAMPLE_PATH tag contains directories, you can use the
631 # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
632 # and *.h) to filter out the source-files in the directories. If left
633 # blank all files are included.
634
635 EXAMPLE_PATTERNS =
636
637 # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
638 # searched for input files to be used with the \include or \dontinclude
639 # commands irrespective of the value of the RECURSIVE tag.
640 # Possible values are YES and NO. If left blank NO is used.
641
642 EXAMPLE_RECURSIVE = NO
643
644 # The IMAGE_PATH tag can be used to specify one or more files or
645 # directories that contain image that are included in the documentation (see
646 # the \image command).
647
648 IMAGE_PATH =
649
650 # The INPUT_FILTER tag can be used to specify a program that doxygen should
651 # invoke to filter for each input file. Doxygen will invoke the filter program
652 # by executing (via popen()) the command <filter> <input-file>, where <filter>
653 # is the value of the INPUT_FILTER tag, and <input-file> is the name of an
654 # input file. Doxygen will then use the output that the filter program writes
655 # to standard output.
656 # If FILTER_PATTERNS is specified, this tag will be
657 # ignored.
658
659 INPUT_FILTER =
660
661 # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
662 # basis.
663 # Doxygen will compare the file name with each pattern and apply the
664 # filter if there is a match.
665 # The filters are a list of the form:
666 # pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
667 # info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER
668 # is applied to all files.
669
670 FILTER_PATTERNS =
671
672 # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
673 # INPUT_FILTER) will be used to filter the input files when producing source
674 # files to browse (i.e. when SOURCE_BROWSER is set to YES).
675
676 FILTER_SOURCE_FILES = NO
677
678 #---------------------------------------------------------------------------
679 # configuration options related to source browsing
680 #---------------------------------------------------------------------------
681
682 # If the SOURCE_BROWSER tag is set to YES then a list of source files will
683 # be generated. Documented entities will be cross-referenced with these sources.
684 # Note: To get rid of all source code in the generated output, make sure also
685 # VERBATIM_HEADERS is set to NO.
686
687 SOURCE_BROWSER = YES
688
689 # Setting the INLINE_SOURCES tag to YES will include the body
690 # of functions and classes directly in the documentation.
691
692 INLINE_SOURCES = YES
693
694 # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
695 # doxygen to hide any special comment blocks from generated source code
696 # fragments. Normal C and C++ comments will always remain visible.
697
698 STRIP_CODE_COMMENTS = YES
699
700 # If the REFERENCED_BY_RELATION tag is set to YES
701 # then for each documented function all documented
702 # functions referencing it will be listed.
703
704 REFERENCED_BY_RELATION = YES
705
706 # If the REFERENCES_RELATION tag is set to YES
707 # then for each documented function all documented entities
708 # called/used by that function will be listed.
709
710 REFERENCES_RELATION = YES
711
712 # If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
713 # and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
714 # functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
715 # link to the source code.
716 # Otherwise they will link to the documentation.
717
718 REFERENCES_LINK_SOURCE = YES
719
720 # If the USE_HTAGS tag is set to YES then the references to source code
721 # will point to the HTML generated by the htags(1) tool instead of doxygen
722 # built-in source browser. The htags tool is part of GNU's global source
723 # tagging system (see http://www.gnu.org/software/global/global.html). You
724 # will need version 4.8.6 or higher.
725
726 USE_HTAGS = NO
727
728 # If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
729 # will generate a verbatim copy of the header file for each class for
730 # which an include is specified. Set to NO to disable this.
731
732 VERBATIM_HEADERS = YES
733
734 #---------------------------------------------------------------------------
735 # configuration options related to the alphabetical class index
736 #---------------------------------------------------------------------------
737
738 # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
739 # of all compounds will be generated. Enable this if the project
740 # contains a lot of classes, structs, unions or interfaces.
741
742 ALPHABETICAL_INDEX = YES
743
744 # If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
745 # the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
746 # in which this list will be split (can be a number in the range [1..20])
747
748 COLS_IN_ALPHA_INDEX = 5
749
750 # In case all classes in a project start with a common prefix, all
751 # classes will be put under the same header in the alphabetical index.
752 # The IGNORE_PREFIX tag can be used to specify one or more prefixes that
753 # should be ignored while generating the index headers.
754
755 IGNORE_PREFIX =
756
757 #---------------------------------------------------------------------------
758 # configuration options related to the HTML output
759 #---------------------------------------------------------------------------
760
761 # If the GENERATE_HTML tag is set to YES (the default) Doxygen will
762 # generate HTML output.
763
764 GENERATE_HTML = YES
765
766 # The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
767 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
768 # put in front of it. If left blank `html' will be used as the default path.
769
770 HTML_OUTPUT = html
771
772 # The HTML_FILE_EXTENSION tag can be used to specify the file extension for
773 # each generated HTML page (for example: .htm,.php,.asp). If it is left blank
774 # doxygen will generate files with .html extension.
775
776 HTML_FILE_EXTENSION = .html
777
778 # The HTML_HEADER tag can be used to specify a personal HTML header for
779 # each generated HTML page. If it is left blank doxygen will generate a
780 # standard header.
781
782 HTML_HEADER =
783
784 # The HTML_FOOTER tag can be used to specify a personal HTML footer for
785 # each generated HTML page. If it is left blank doxygen will generate a
786 # standard footer.
787
788 HTML_FOOTER =
789
790 # If the HTML_TIMESTAMP tag is set to YES then the generated HTML
791 # documentation will contain the timesstamp.
792
793 HTML_TIMESTAMP = NO
794
795 # The HTML_STYLESHEET tag can be used to specify a user-defined cascading
796 # style sheet that is used by each HTML page. It can be used to
797 # fine-tune the look of the HTML output. If the tag is left blank doxygen
798 # will generate a default style sheet. Note that doxygen will try to copy
799 # the style sheet file to the HTML output directory, so don't put your own
800 # stylesheet in the HTML output directory as well, or it will be erased!
801
802 HTML_STYLESHEET =
803
804 # If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
805 # files or namespaces will be aligned in HTML using tables. If set to
806 # NO a bullet list will be used.
807
808 HTML_ALIGN_MEMBERS = YES
809
810 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
811 # documentation will contain sections that can be hidden and shown after the
812 # page has loaded. For this to work a browser that supports
813 # JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox
814 # Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).
815
816 HTML_DYNAMIC_SECTIONS = NO
817
818 # If the GENERATE_DOCSET tag is set to YES, additional index files
819 # will be generated that can be used as input for Apple's Xcode 3
820 # integrated development environment, introduced with OSX 10.5 (Leopard).
821 # To create a documentation set, doxygen will generate a Makefile in the
822 # HTML output directory. Running make will produce the docset in that
823 # directory and running "make install" will install the docset in
824 # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
825 # it at startup.
826 # See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information.
827
828 GENERATE_DOCSET = NO
829
830 # When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
831 # feed. A documentation feed provides an umbrella under which multiple
832 # documentation sets from a single provider (such as a company or product suite)
833 # can be grouped.
834
835 DOCSET_FEEDNAME = "Doxygen generated docs"
836
837 # When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
838 # should uniquely identify the documentation set bundle. This should be a
839 # reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
840 # will append .docset to the name.
841
842 DOCSET_BUNDLE_ID = org.doxygen.Project
843
844 # If the GENERATE_HTMLHELP tag is set to YES, additional index files
845 # will be generated that can be used as input for tools like the
846 # Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
847 # of the generated HTML documentation.
848
849 GENERATE_HTMLHELP = NO
850
851 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
852 # be used to specify the file name of the resulting .chm file. You
853 # can add a path in front of the file if the result should not be
854 # written to the html output directory.
855
856 CHM_FILE =
857
858 # If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
859 # be used to specify the location (absolute path including file name) of
860 # the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
861 # the HTML help compiler on the generated index.hhp.
862
863 HHC_LOCATION =
864
865 # If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
866 # controls if a separate .chi index file is generated (YES) or that
867 # it should be included in the master .chm file (NO).
868
869 GENERATE_CHI = NO
870
871 # If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
872 # is used to encode HtmlHelp index (hhk), content (hhc) and project file
873 # content.
874
875 CHM_INDEX_ENCODING =
876
877 # If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
878 # controls whether a binary table of contents is generated (YES) or a
879 # normal table of contents (NO) in the .chm file.
880
881 BINARY_TOC = NO
882
883 # The TOC_EXPAND flag can be set to YES to add extra items for group members
884 # to the contents of the HTML help documentation and to the tree view.
885
886 TOC_EXPAND = NO
887
888 # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER
889 # are set, an additional index file will be generated that can be used as input for
890 # Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated
891 # HTML documentation.
892
893 GENERATE_QHP = NO
894
895 # If the QHG_LOCATION tag is specified, the QCH_FILE tag can
896 # be used to specify the file name of the resulting .qch file.
897 # The path specified is relative to the HTML output folder.
898
899 QCH_FILE =
900
901 # The QHP_NAMESPACE tag specifies the namespace to use when generating
902 # Qt Help Project output. For more information please see
903 # http://doc.trolltech.com/qthelpproject.html#namespace
904
905 QHP_NAMESPACE =
906
907 # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
908 # Qt Help Project output. For more information please see
909 # http://doc.trolltech.com/qthelpproject.html#virtual-folders
910
911 QHP_VIRTUAL_FOLDER = doc
912
913 # If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add.
914 # For more information please see
915 # http://doc.trolltech.com/qthelpproject.html#custom-filters
916
917 QHP_CUST_FILTER_NAME =
918
919 # The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see
920 # <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>.
921
922 QHP_CUST_FILTER_ATTRS =
923
924 # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's
925 # filter section matches.
926 # <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>.
927
928 QHP_SECT_FILTER_ATTRS =
929
930 # If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
931 # be used to specify the location of Qt's qhelpgenerator.
932 # If non-empty doxygen will try to run qhelpgenerator on the generated
933 # .qhp file.
934
935 QHG_LOCATION =
936
937 # The DISABLE_INDEX tag can be used to turn on/off the condensed index at
938 # top of each HTML page. The value NO (the default) enables the index and
939 # the value YES disables it.
940
941 DISABLE_INDEX = NO
942
943 # This tag can be used to set the number of enum values (range [1..20])
944 # that doxygen will group on one line in the generated HTML documentation.
945
946 ENUM_VALUES_PER_LINE = 4
947
948 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
949 # structure should be generated to display hierarchical information.
950 # If the tag value is set to YES, a side panel will be generated
951 # containing a tree-like index structure (just like the one that
952 # is generated for HTML Help). For this to work a browser that supports
953 # JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
954 # Windows users are probably better off using the HTML help feature.
955
956 GENERATE_TREEVIEW = YES
957
958 # By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
959 # and Class Hierarchy pages using a tree view instead of an ordered list.
960
961 USE_INLINE_TREES = YES
962
963 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
964 # used to set the initial width (in pixels) of the frame in which the tree
965 # is shown.
966
967 TREEVIEW_WIDTH = 250
968
969 # Use this tag to change the font size of Latex formulas included
970 # as images in the HTML documentation. The default is 10. Note that
971 # when you change the font size after a successful doxygen run you need
972 # to manually remove any form_*.png images from the HTML output directory
973 # to force them to be regenerated.
974
975 FORMULA_FONTSIZE = 10
976
977 # When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript
978 # and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP)
979 # there is already a search function so this one should typically
980 # be disabled.
981
982 SEARCHENGINE = YES
983
984 #---------------------------------------------------------------------------
985 # configuration options related to the LaTeX output
986 #---------------------------------------------------------------------------
987
988 # If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
989 # generate Latex output.
990
991 GENERATE_LATEX = YES
992
993 # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
994 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
995 # put in front of it. If left blank `latex' will be used as the default path.
996
997 LATEX_OUTPUT = latex
998
999 # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1000 # invoked. If left blank `latex' will be used as the default command name.
1001
1002 LATEX_CMD_NAME = latex
1003
1004 # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
1005 # generate index for LaTeX. If left blank `makeindex' will be used as the
1006 # default command name.
1007
1008 MAKEINDEX_CMD_NAME = makeindex
1009
1010 # If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
1011 # LaTeX documents. This may be useful for small projects and may help to
1012 # save some trees in general.
1013
1014 COMPACT_LATEX = NO
1015
1016 # The PAPER_TYPE tag can be used to set the paper type that is used
1017 # by the printer. Possible values are: a4, a4wide, letter, legal and
1018 # executive. If left blank a4wide will be used.
1019
1020 PAPER_TYPE = a4wide
1021
1022 # The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
1023 # packages that should be included in the LaTeX output.
1024
1025 EXTRA_PACKAGES =
1026
1027 # The LATEX_HEADER tag can be used to specify a personal LaTeX header for
1028 # the generated latex document. The header should contain everything until
1029 # the first chapter. If it is left blank doxygen will generate a
1030 # standard header. Notice: only use this tag if you know what you are doing!
1031
1032 LATEX_HEADER =
1033
1034 # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
1035 # is prepared for conversion to pdf (using ps2pdf). The pdf file will
1036 # contain links (just like the HTML output) instead of page references
1037 # This makes the output suitable for online browsing using a pdf viewer.
1038
1039 PDF_HYPERLINKS = YES
1040
1041 # If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
1042 # plain latex in the generated Makefile. Set this option to YES to get a
1043 # higher quality PDF documentation.
1044
1045 USE_PDFLATEX = YES
1046
1047 # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
1048 # command to the generated LaTeX files. This will instruct LaTeX to keep
1049 # running if errors occur, instead of asking the user for help.
1050 # This option is also used when generating formulas in HTML.
1051
1052 LATEX_BATCHMODE = NO
1053
1054 # If LATEX_HIDE_INDICES is set to YES then doxygen will not
1055 # include the index chapters (such as File Index, Compound Index, etc.)
1056 # in the output.
1057
1058 LATEX_HIDE_INDICES = NO
1059
1060 # If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER.
1061
1062 LATEX_SOURCE_CODE = NO
1063
1064 #---------------------------------------------------------------------------
1065 # configuration options related to the RTF output
1066 #---------------------------------------------------------------------------
1067
1068 # If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
1069 # The RTF output is optimized for Word 97 and may not look very pretty with
1070 # other RTF readers or editors.
1071
1072 GENERATE_RTF = NO
1073
1074 # The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
1075 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1076 # put in front of it. If left blank `rtf' will be used as the default path.
1077
1078 RTF_OUTPUT = rtf
1079
1080 # If the COMPACT_RTF tag is set to YES Doxygen generates more compact
1081 # RTF documents. This may be useful for small projects and may help to
1082 # save some trees in general.
1083
1084 COMPACT_RTF = NO
1085
1086 # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
1087 # will contain hyperlink fields. The RTF file will
1088 # contain links (just like the HTML output) instead of page references.
1089 # This makes the output suitable for online browsing using WORD or other
1090 # programs which support those fields.
1091 # Note: wordpad (write) and others do not support links.
1092
1093 RTF_HYPERLINKS = NO
1094
1095 # Load stylesheet definitions from file. Syntax is similar to doxygen's
1096 # config file, i.e. a series of assignments. You only have to provide
1097 # replacements, missing definitions are set to their default value.
1098
1099 RTF_STYLESHEET_FILE =
1100
1101 # Set optional variables used in the generation of an rtf document.
1102 # Syntax is similar to doxygen's config file.
1103
1104 RTF_EXTENSIONS_FILE =
1105
1106 #---------------------------------------------------------------------------
1107 # configuration options related to the man page output
1108 #---------------------------------------------------------------------------
1109
1110 # If the GENERATE_MAN tag is set to YES (the default) Doxygen will
1111 # generate man pages
1112
1113 GENERATE_MAN = NO
1114
1115 # The MAN_OUTPUT tag is used to specify where the man pages will be put.
1116 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1117 # put in front of it. If left blank `man' will be used as the default path.
1118
1119 MAN_OUTPUT = man
1120
1121 # The MAN_EXTENSION tag determines the extension that is added to
1122 # the generated man pages (default is the subroutine's section .3)
1123
1124 MAN_EXTENSION = .3
1125
1126 # If the MAN_LINKS tag is set to YES and Doxygen generates man output,
1127 # then it will generate one additional man file for each entity
1128 # documented in the real man page(s). These additional files
1129 # only source the real man page, but without them the man command
1130 # would be unable to find the correct page. The default is NO.
1131
1132 MAN_LINKS = NO
1133
1134 #---------------------------------------------------------------------------
1135 # configuration options related to the XML output
1136 #---------------------------------------------------------------------------
1137
1138 # If the GENERATE_XML tag is set to YES Doxygen will
1139 # generate an XML file that captures the structure of
1140 # the code including all documentation.
1141
1142 GENERATE_XML = NO
1143
1144 # The XML_OUTPUT tag is used to specify where the XML pages will be put.
1145 # If a relative path is entered the value of OUTPUT_DIRECTORY will be
1146 # put in front of it. If left blank `xml' will be used as the default path.
1147
1148 XML_OUTPUT = xml
1149
1150 # The XML_SCHEMA tag can be used to specify an XML schema,
1151 # which can be used by a validating XML parser to check the
1152 # syntax of the XML files.
1153
1154 XML_SCHEMA =
1155
1156 # The XML_DTD tag can be used to specify an XML DTD,
1157 # which can be used by a validating XML parser to check the
1158 # syntax of the XML files.
1159
1160 XML_DTD =
1161
1162 # If the XML_PROGRAMLISTING tag is set to YES Doxygen will
1163 # dump the program listings (including syntax highlighting
1164 # and cross-referencing information) to the XML output. Note that
1165 # enabling this will significantly increase the size of the XML output.
1166
1167 XML_PROGRAMLISTING = YES
1168
1169 #---------------------------------------------------------------------------
1170 # configuration options for the AutoGen Definitions output
1171 #---------------------------------------------------------------------------
1172
1173 # If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
1174 # generate an AutoGen Definitions (see autogen.sf.net) file
1175 # that captures the structure of the code including all
1176 # documentation. Note that this feature is still experimental
1177 # and incomplete at the moment.
1178
1179 GENERATE_AUTOGEN_DEF = NO
1180
1181 #---------------------------------------------------------------------------
1182 # configuration options related to the Perl module output
1183 #---------------------------------------------------------------------------
1184
1185 # If the GENERATE_PERLMOD tag is set to YES Doxygen will
1186 # generate a Perl module file that captures the structure of
1187 # the code including all documentation. Note that this
1188 # feature is still experimental and incomplete at the
1189 # moment.
1190
1191 GENERATE_PERLMOD = NO
1192
1193 # If the PERLMOD_LATEX tag is set to YES Doxygen will generate
1194 # the necessary Makefile rules, Perl scripts and LaTeX code to be able
1195 # to generate PDF and DVI output from the Perl module output.
1196
1197 PERLMOD_LATEX = NO
1198
1199 # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
1200 # nicely formatted so it can be parsed by a human reader.
1201 # This is useful
1202 # if you want to understand what is going on.
1203 # On the other hand, if this
1204 # tag is set to NO the size of the Perl module output will be much smaller
1205 # and Perl will parse it just the same.
1206
1207 PERLMOD_PRETTY = YES
1208
1209 # The names of the make variables in the generated doxyrules.make file
1210 # are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
1211 # This is useful so different doxyrules.make files included by the same
1212 # Makefile don't overwrite each other's variables.
1213
1214 PERLMOD_MAKEVAR_PREFIX =
1215
1216 #---------------------------------------------------------------------------
1217 # Configuration options related to the preprocessor
1218 #---------------------------------------------------------------------------
1219
1220 # If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
1221 # evaluate all C-preprocessor directives found in the sources and include
1222 # files.
1223
1224 ENABLE_PREPROCESSING = YES
1225
1226 # If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
1227 # names in the source code. If set to NO (the default) only conditional
1228 # compilation will be performed. Macro expansion can be done in a controlled
1229 # way by setting EXPAND_ONLY_PREDEF to YES.
1230
1231 MACRO_EXPANSION = NO
1232
1233 # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
1234 # then the macro expansion is limited to the macros specified with the
1235 # PREDEFINED and EXPAND_AS_DEFINED tags.
1236
1237 EXPAND_ONLY_PREDEF = NO
1238
1239 # If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
1240 # in the INCLUDE_PATH (see below) will be search if a #include is found.
1241
1242 SEARCH_INCLUDES = YES
1243
1244 # The INCLUDE_PATH tag can be used to specify one or more directories that
1245 # contain include files that are not input files but should be processed by
1246 # the preprocessor.
1247
1248 INCLUDE_PATH =
1249
1250 # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1251 # patterns (like *.h and *.hpp) to filter out the header-files in the
1252 # directories. If left blank, the patterns specified with FILE_PATTERNS will
1253 # be used.
1254
1255 INCLUDE_FILE_PATTERNS =
1256
1257 # The PREDEFINED tag can be used to specify one or more macro names that
1258 # are defined before the preprocessor is started (similar to the -D option of
1259 # gcc). The argument of the tag is a list of macros of the form: name
1260 # or name=definition (no spaces). If the definition and the = are
1261 # omitted =1 is assumed. To prevent a macro definition from being
1262 # undefined via #undef or recursively expanded use the := operator
1263 # instead of the = operator.
1264
1265 PREDEFINED =
1266
1267 # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
1268 # this tag can be used to specify a list of macro names that should be expanded.
1269 # The macro definition that is found in the sources will be used.
1270 # Use the PREDEFINED tag if you want to use a different macro definition.
1271
1272 EXPAND_AS_DEFINED =
1273
1274 # If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
1275 # doxygen's preprocessor will remove all function-like macros that are alone
1276 # on a line, have an all uppercase name, and do not end with a semicolon. Such
1277 # function macros are typically used for boiler-plate code, and will confuse
1278 # the parser if not removed.
1279
1280 SKIP_FUNCTION_MACROS = YES
1281
1282 #---------------------------------------------------------------------------
1283 # Configuration::additions related to external references
1284 #---------------------------------------------------------------------------
1285
1286 # The TAGFILES option can be used to specify one or more tagfiles.
1287 # Optionally an initial location of the external documentation
1288 # can be added for each tagfile. The format of a tag file without
1289 # this location is as follows:
1290 #
1291 # TAGFILES = file1 file2 ...
1292 # Adding location for the tag files is done as follows:
1293 #
1294 # TAGFILES = file1=loc1 "file2 = loc2" ...
1295 # where "loc1" and "loc2" can be relative or absolute paths or
1296 # URLs. If a location is present for each tag, the installdox tool
1297 # does not have to be run to correct the links.
1298 # Note that each tag file must have a unique name
1299 # (where the name does NOT include the path)
1300 # If a tag file is not located in the directory in which doxygen
1301 # is run, you must also specify the path to the tagfile here.
1302
1303 TAGFILES =
1304
1305 # When a file name is specified after GENERATE_TAGFILE, doxygen will create
1306 # a tag file that is based on the input files it reads.
1307
1308 GENERATE_TAGFILE =
1309
1310 # If the ALLEXTERNALS tag is set to YES all external classes will be listed
1311 # in the class index. If set to NO only the inherited external classes
1312 # will be listed.
1313
1314 ALLEXTERNALS = NO
1315
1316 # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
1317 # in the modules index. If set to NO, only the current project's groups will
1318 # be listed.
1319
1320 EXTERNAL_GROUPS = YES
1321
1322 # The PERL_PATH should be the absolute path and name of the perl script
1323 # interpreter (i.e. the result of `which perl').
1324
1325 PERL_PATH = /usr/bin/perl
1326
1327 #---------------------------------------------------------------------------
1328 # Configuration options related to the dot tool
1329 #---------------------------------------------------------------------------
1330
1331 # If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
1332 # generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
1333 # or super classes. Setting the tag to NO turns the diagrams off. Note that
1334 # this option is superseded by the HAVE_DOT option below. This is only a
1335 # fallback. It is recommended to install and use dot, since it yields more
1336 # powerful graphs.
1337
1338 CLASS_DIAGRAMS = YES
1339
1340 # You can define message sequence charts within doxygen comments using the \msc
1341 # command. Doxygen will then run the mscgen tool (see
1342 # http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
1343 # documentation. The MSCGEN_PATH tag allows you to specify the directory where
1344 # the mscgen tool resides. If left empty the tool is assumed to be found in the
1345 # default search path.
1346
1347 MSCGEN_PATH =
1348
1349 # If set to YES, the inheritance and collaboration graphs will hide
1350 # inheritance and usage relations if the target is undocumented
1351 # or is not a class.
1352
1353 HIDE_UNDOC_RELATIONS = NO
1354
1355 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
1356 # available from the path. This tool is part of Graphviz, a graph visualization
1357 # toolkit from AT&T and Lucent Bell Labs. The other options in this section
1358 # have no effect if this option is set to NO (the default)
1359
1360 HAVE_DOT = YES
1361
1362 # By default doxygen will write a font called FreeSans.ttf to the output
1363 # directory and reference it in all dot files that doxygen generates. This
1364 # font does not include all possible unicode characters however, so when you need
1365 # these (or just want a differently looking font) you can specify the font name
1366 # using DOT_FONTNAME. You need need to make sure dot is able to find the font,
1367 # which can be done by putting it in a standard location or by setting the
1368 # DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory
1369 # containing the font.
1370
1371 DOT_FONTNAME = FreeSans
1372
1373 # The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
1374 # The default size is 10pt.
1375
1376 DOT_FONTSIZE = 10
1377
1378 # By default doxygen will tell dot to use the output directory to look for the
1379 # FreeSans.ttf font (which doxygen will put there itself). If you specify a
1380 # different font using DOT_FONTNAME you can set the path where dot
1381 # can find it using this tag.
1382
1383 DOT_FONTPATH =
1384
1385 # If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
1386 # will generate a graph for each documented class showing the direct and
1387 # indirect inheritance relations. Setting this tag to YES will force the
1388 # the CLASS_DIAGRAMS tag to NO.
1389
1390 CLASS_GRAPH = YES
1391
1392 # If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
1393 # will generate a graph for each documented class showing the direct and
1394 # indirect implementation dependencies (inheritance, containment, and
1395 # class references variables) of the class with other documented classes.
1396
1397 COLLABORATION_GRAPH = YES
1398
1399 # If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
1400 # will generate a graph for groups, showing the direct groups dependencies
1401
1402 GROUP_GRAPHS = YES
1403
1404 # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
1405 # collaboration diagrams in a style similar to the OMG's Unified Modeling
1406 # Language.
1407
1408 UML_LOOK = NO
1409
1410 # If set to YES, the inheritance and collaboration graphs will show the
1411 # relations between templates and their instances.
1412
1413 TEMPLATE_RELATIONS = NO
1414
1415 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
1416 # tags are set to YES then doxygen will generate a graph for each documented
1417 # file showing the direct and indirect include dependencies of the file with
1418 # other documented files.
1419
1420 INCLUDE_GRAPH = YES
1421
1422 # If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
1423 # HAVE_DOT tags are set to YES then doxygen will generate a graph for each
1424 # documented header file showing the documented files that directly or
1425 # indirectly include this file.
1426
1427 INCLUDED_BY_GRAPH = YES
1428
1429 # If the CALL_GRAPH and HAVE_DOT options are set to YES then
1430 # doxygen will generate a call dependency graph for every global function
1431 # or class method. Note that enabling this option will significantly increase
1432 # the time of a run. So in most cases it will be better to enable call graphs
1433 # for selected functions only using the \callgraph command.
1434
1435 CALL_GRAPH = YES
1436
1437 # If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
1438 # doxygen will generate a caller dependency graph for every global function
1439 # or class method. Note that enabling this option will significantly increase
1440 # the time of a run. So in most cases it will be better to enable caller
1441 # graphs for selected functions only using the \callergraph command.
1442
1443 CALLER_GRAPH = YES
1444
1445 # If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
1446 # will graphical hierarchy of all classes instead of a textual one.
1447
1448 GRAPHICAL_HIERARCHY = YES
1449
1450 # If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
1451 # then doxygen will show the dependencies a directory has on other directories
1452 # in a graphical way. The dependency relations are determined by the #include
1453 # relations between the files in the directories.
1454
1455 DIRECTORY_GRAPH = YES
1456
1457 # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
1458 # generated by dot. Possible values are png, jpg, or gif
1459 # If left blank png will be used.
1460
1461 DOT_IMAGE_FORMAT = png
1462
1463 # The tag DOT_PATH can be used to specify the path where the dot tool can be
1464 # found. If left blank, it is assumed the dot tool can be found in the path.
1465
1466 DOT_PATH =
1467
1468 # The DOTFILE_DIRS tag can be used to specify one or more directories that
1469 # contain dot files that are included in the documentation (see the
1470 # \dotfile command).
1471
1472 DOTFILE_DIRS =
1473
1474 # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
1475 # nodes that will be shown in the graph. If the number of nodes in a graph
1476 # becomes larger than this value, doxygen will truncate the graph, which is
1477 # visualized by representing a node as a red box. Note that doxygen if the
1478 # number of direct children of the root node in a graph is already larger than
1479 # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
1480 # that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
1481
1482 DOT_GRAPH_MAX_NODES = 50
1483
1484 # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
1485 # graphs generated by dot. A depth value of 3 means that only nodes reachable
1486 # from the root by following a path via at most 3 edges will be shown. Nodes
1487 # that lay further from the root node will be omitted. Note that setting this
1488 # option to 1 or 2 may greatly reduce the computation time needed for large
1489 # code bases. Also note that the size of a graph can be further restricted by
1490 # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
1491
1492 MAX_DOT_GRAPH_DEPTH = 0
1493
1494 # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
1495 # background. This is disabled by default, because dot on Windows does not
1496 # seem to support this out of the box. Warning: Depending on the platform used,
1497 # enabling this option may lead to badly anti-aliased labels on the edges of
1498 # a graph (i.e. they become hard to read).
1499
1500 DOT_TRANSPARENT = NO
1501
1502 # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
1503 # files in one run (i.e. multiple -o and -T options on the command line). This
1504 # makes dot run faster, but since only newer versions of dot (>1.8.10)
1505 # support this, this feature is disabled by default.
1506
1507 DOT_MULTI_TARGETS = NO
1508
1509 # If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
1510 # generate a legend page explaining the meaning of the various boxes and
1511 # arrows in the dot generated graphs.
1512
1513 GENERATE_LEGEND = YES
1514
1515 # If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
1516 # remove the intermediate dot files that are used to generate
1517 # the various graphs.
1518
1519 DOT_CLEANUP = YES