Mercurial > 510Connectbot
view src/com/jcraft/jzlib/Inflate.java @ 189:ab6f64d1a24a
use floating point font size, change size by scaling factor rather than linear addition
author | Carl Byington <carl@five-ten-sg.com> |
---|---|
date | Wed, 02 Jul 2014 16:14:57 -0700 |
parents | 0ce5cc452d02 |
children | 46c2115ae1c8 |
line wrap: on
line source
/* -*-mode:java; c-basic-offset:2; -*- */ /* Copyright (c) 2000,2001,2002,2003 ymnk, JCraft,Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. The names of the authors may not be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL JCRAFT, INC. OR ANY CONTRIBUTORS TO THIS SOFTWARE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* * This program is based on zlib-1.1.3, so all credit should go authors * Jean-loup Gailly(jloup@gzip.org) and Mark Adler(madler@alumni.caltech.edu) * and contributors of zlib. */ package com.jcraft.jzlib; final class Inflate { static final private int MAX_WBITS = 15; // 32K LZ77 window // preset dictionary flag in zlib header static final private int PRESET_DICT = 0x20; static final int Z_NO_FLUSH = 0; static final int Z_PARTIAL_FLUSH = 1; static final int Z_SYNC_FLUSH = 2; static final int Z_FULL_FLUSH = 3; static final int Z_FINISH = 4; static final private int Z_DEFLATED = 8; static final private int Z_OK = 0; static final private int Z_STREAM_END = 1; static final private int Z_NEED_DICT = 2; static final private int Z_ERRNO = -1; static final private int Z_STREAM_ERROR = -2; static final private int Z_DATA_ERROR = -3; static final private int Z_MEM_ERROR = -4; static final private int Z_BUF_ERROR = -5; static final private int Z_VERSION_ERROR = -6; static final private int METHOD = 0; // waiting for method byte static final private int FLAG = 1; // waiting for flag byte static final private int DICT4 = 2; // four dictionary check bytes to go static final private int DICT3 = 3; // three dictionary check bytes to go static final private int DICT2 = 4; // two dictionary check bytes to go static final private int DICT1 = 5; // one dictionary check byte to go static final private int DICT0 = 6; // waiting for inflateSetDictionary static final private int BLOCKS = 7; // decompressing blocks static final private int CHECK4 = 8; // four check bytes to go static final private int CHECK3 = 9; // three check bytes to go static final private int CHECK2 = 10; // two check bytes to go static final private int CHECK1 = 11; // one check byte to go static final private int DONE = 12; // finished check, done static final private int BAD = 13; // got an error--stay here int mode; // current inflate mode // mode dependent information int method; // if FLAGS, method byte // if CHECK, check values to compare long[] was = new long[1] ; // computed check value long need; // stream check value // if BAD, inflateSync's marker bytes count int marker; // mode independent information int nowrap; // flag for no wrapper int wbits; // log2(window size) (8..15, defaults to 15) InfBlocks blocks; // current inflate_blocks state int inflateReset(ZStream z) { if (z == null || z.istate == null) return Z_STREAM_ERROR; z.total_in = z.total_out = 0; z.msg = null; z.istate.mode = z.istate.nowrap != 0 ? BLOCKS : METHOD; z.istate.blocks.reset(z, null); return Z_OK; } int inflateEnd(ZStream z) { if (blocks != null) blocks.free(z); blocks = null; // ZFREE(z, z->state); return Z_OK; } int inflateInit(ZStream z, int w) { z.msg = null; blocks = null; // handle undocumented nowrap option (no zlib header or check) nowrap = 0; if (w < 0) { w = - w; nowrap = 1; } // set window size if (w < 8 || w > 15) { inflateEnd(z); return Z_STREAM_ERROR; } wbits = w; z.istate.blocks = new InfBlocks(z, z.istate.nowrap != 0 ? null : this, 1 << w); // reset state inflateReset(z); return Z_OK; } int inflate(ZStream z, int f) { int r; int b; if (z == null || z.istate == null || z.next_in == null) return Z_STREAM_ERROR; f = f == Z_FINISH ? Z_BUF_ERROR : Z_OK; r = Z_BUF_ERROR; while (true) { //System.out.println("mode: "+z.istate.mode); switch (z.istate.mode) { case METHOD: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; if (((z.istate.method = z.next_in[z.next_in_index++]) & 0xf) != Z_DEFLATED) { z.istate.mode = BAD; z.msg = "unknown compression method"; z.istate.marker = 5; // can't try inflateSync break; } if ((z.istate.method >> 4) + 8 > z.istate.wbits) { z.istate.mode = BAD; z.msg = "invalid window size"; z.istate.marker = 5; // can't try inflateSync break; } z.istate.mode = FLAG; case FLAG: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; b = (z.next_in[z.next_in_index++]) & 0xff; if ((((z.istate.method << 8) + b) % 31) != 0) { z.istate.mode = BAD; z.msg = "incorrect header check"; z.istate.marker = 5; // can't try inflateSync break; } if ((b & PRESET_DICT) == 0) { z.istate.mode = BLOCKS; break; } z.istate.mode = DICT4; case DICT4: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need = ((z.next_in[z.next_in_index++] & 0xff) << 24) & 0xff000000L; z.istate.mode = DICT3; case DICT3: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need += ((z.next_in[z.next_in_index++] & 0xff) << 16) & 0xff0000L; z.istate.mode = DICT2; case DICT2: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need += ((z.next_in[z.next_in_index++] & 0xff) << 8) & 0xff00L; z.istate.mode = DICT1; case DICT1: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need += (z.next_in[z.next_in_index++] & 0xffL); z.adler = z.istate.need; z.istate.mode = DICT0; return Z_NEED_DICT; case DICT0: z.istate.mode = BAD; z.msg = "need dictionary"; z.istate.marker = 0; // can try inflateSync return Z_STREAM_ERROR; case BLOCKS: r = z.istate.blocks.proc(z, r); if (r == Z_DATA_ERROR) { z.istate.mode = BAD; z.istate.marker = 0; // can try inflateSync break; } if (r == Z_OK) { r = f; } if (r != Z_STREAM_END) { return r; } r = f; z.istate.blocks.reset(z, z.istate.was); if (z.istate.nowrap != 0) { z.istate.mode = DONE; break; } z.istate.mode = CHECK4; case CHECK4: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need = ((z.next_in[z.next_in_index++] & 0xff) << 24) & 0xff000000L; z.istate.mode = CHECK3; case CHECK3: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need += ((z.next_in[z.next_in_index++] & 0xff) << 16) & 0xff0000L; z.istate.mode = CHECK2; case CHECK2: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need += ((z.next_in[z.next_in_index++] & 0xff) << 8) & 0xff00L; z.istate.mode = CHECK1; case CHECK1: if (z.avail_in == 0)return r; r = f; z.avail_in--; z.total_in++; z.istate.need += (z.next_in[z.next_in_index++] & 0xffL); if (((int)(z.istate.was[0])) != ((int)(z.istate.need))) { z.istate.mode = BAD; z.msg = "incorrect data check"; z.istate.marker = 5; // can't try inflateSync break; } z.istate.mode = DONE; case DONE: return Z_STREAM_END; case BAD: return Z_DATA_ERROR; default: return Z_STREAM_ERROR; } } } int inflateSetDictionary(ZStream z, byte[] dictionary, int dictLength) { int index = 0; int length = dictLength; if (z == null || z.istate == null || z.istate.mode != DICT0) return Z_STREAM_ERROR; if (z._adler.adler32(1L, dictionary, 0, dictLength) != z.adler) { return Z_DATA_ERROR; } z.adler = z._adler.adler32(0, null, 0, 0); if (length >= (1 << z.istate.wbits)) { length = (1 << z.istate.wbits) - 1; index = dictLength - length; } z.istate.blocks.set_dictionary(dictionary, index, length); z.istate.mode = BLOCKS; return Z_OK; } static private byte[] mark = { (byte)0, (byte)0, (byte)0xff, (byte)0xff}; int inflateSync(ZStream z) { int n; // number of bytes to look at int p; // pointer to bytes int m; // number of marker bytes found in a row long r, w; // temporaries to save total_in and total_out // set up if (z == null || z.istate == null) return Z_STREAM_ERROR; if (z.istate.mode != BAD) { z.istate.mode = BAD; z.istate.marker = 0; } if ((n = z.avail_in) == 0) return Z_BUF_ERROR; p = z.next_in_index; m = z.istate.marker; // search while (n != 0 && m < 4) { if (z.next_in[p] == mark[m]) { m++; } else if (z.next_in[p] != 0) { m = 0; } else { m = 4 - m; } p++; n--; } // restore z.total_in += p - z.next_in_index; z.next_in_index = p; z.avail_in = n; z.istate.marker = m; // return no joy or set up to restart on a new block if (m != 4) { return Z_DATA_ERROR; } r = z.total_in; w = z.total_out; inflateReset(z); z.total_in = r; z.total_out = w; z.istate.mode = BLOCKS; return Z_OK; } // Returns true if inflate is currently at the end of a block generated // by Z_SYNC_FLUSH or Z_FULL_FLUSH. This function is used by one PPP // implementation to provide an additional safety check. PPP uses Z_SYNC_FLUSH // but removes the length bytes of the resulting empty stored block. When // decompressing, PPP checks that at the end of input packet, inflate is // waiting for these length bytes. int inflateSyncPoint(ZStream z) { if (z == null || z.istate == null || z.istate.blocks == null) return Z_STREAM_ERROR; return z.istate.blocks.sync_point(); } }