syslog2iptables: aclocal.m4 comparison

comparison aclocal.m4 @ 1:551433a01cab

initial coding

author	carl
date	Wed, 23 Nov 2005 19:29:14 -0800
parents
children

comparison

equal deleted inserted replaced

-:a3b8d64b2ae5
+:551433a01cab
+# generated automatically by aclocal 1.9.2 -*- Autoconf -*-
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+# serial 47 AC_PROG_LIBTOOL
+# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
+# -----------------------------------------------------------
+# If this macro is not defined by Autoconf, define it here.
+m4_ifdef([AC_PROVIDE_IFELSE],
+[],
+[m4_define([AC_PROVIDE_IFELSE],
+	         [m4_ifdef([AC_PROVIDE_$1],
+		           [$2], [$3])])])
+# AC_PROG_LIBTOOL
+# ---------------
+AC_DEFUN([AC_PROG_LIBTOOL],
+[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
+dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
+dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+[AC_LIBTOOL_CXX],
+[define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
+])])
+dnl And a similar setup for Fortran 77 support
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+[AC_LIBTOOL_F77],
+[define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77
+])])
+dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
+dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
+dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+[AC_LIBTOOL_GCJ],
+[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+[AC_LIBTOOL_GCJ],
+[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],
+	[AC_LIBTOOL_GCJ],
+[ifdef([AC_PROG_GCJ],
+	     [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+ifdef([A][M_PROG_GCJ],
+	     [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])])
+ifdef([LT_AC_PROG_GCJ],
+	     [define([LT_AC_PROG_GCJ],
+		defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])])
+])])# AC_PROG_LIBTOOL
+# _AC_PROG_LIBTOOL
+# ----------------
+AC_DEFUN([_AC_PROG_LIBTOOL],
+[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl
+AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+# Prevent multiple expansion
+define([AC_PROG_LIBTOOL], [])
+])# _AC_PROG_LIBTOOL
+# AC_LIBTOOL_SETUP
+# ----------------
+AC_DEFUN([AC_LIBTOOL_SETUP],
+[AC_PREREQ(2.50)dnl
+AC_REQUIRE([AC_ENABLE_SHARED])dnl
+AC_REQUIRE([AC_ENABLE_STATIC])dnl
+AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_LD])dnl
+AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
+AC_REQUIRE([AC_PROG_NM])dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+AC_REQUIRE([AC_OBJEXT])dnl
+AC_REQUIRE([AC_EXEEXT])dnl
+dnl
+AC_LIBTOOL_SYS_MAX_CMD_LEN
+AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+AC_LIBTOOL_OBJDIR
+AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_PROG_ECHO_BACKSLASH
+case $host_os in
+aix3*)
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+COLLECT_NAMES=
+export COLLECT_NAMES
+fi
+;;
+esac
+# Sed substitution that helps us do robust quoting.  It backslashifies
+# metacharacters that are still active within double-quoted strings.
+Xsed='sed -e s/^X//'
+[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
+# Same as above, but do not quote variable references.
+[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+# Constants:
+rm="rm -f"
+# Global variables:
+default_ofile=libtool
+can_build_shared=yes
+# All known linkers require a `.a' archive for static linking (except M$VC,
+# which needs '.lib').
+libext=a
+ltmain="$ac_aux_dir/ltmain.sh"
+ofile="$default_ofile"
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+AC_CHECK_TOOL(AR, ar, false)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+AC_CHECK_TOOL(STRIP, strip, :)
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+# Set sane defaults for various variables
+test -z "$AR" && AR=ar
+test -z "$AR_FLAGS" && AR_FLAGS=cru
+test -z "$AS" && AS=as
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+test -z "$LD" && LD=ld
+test -z "$LN_S" && LN_S="ln -s"
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+test -z "$NM" && NM=nm
+test -z "$SED" && SED=sed
+test -z "$OBJDUMP" && OBJDUMP=objdump
+test -z "$RANLIB" && RANLIB=:
+test -z "$STRIP" && STRIP=:
+test -z "$ac_objext" && ac_objext=o
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+if test -n "$RANLIB"; then
+case $host_os in
+openbsd*)
+old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
+;;
+*)
+old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
+;;
+esac
+old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
+fi
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+AC_PATH_MAGIC
+fi
+;;
+esac
+AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+enable_win32_dll=yes, enable_win32_dll=no)
+AC_ARG_ENABLE([libtool-lock],
+[AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+AC_ARG_WITH([pic],
+[AC_HELP_STRING([--with-pic],
+	[try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+[pic_mode="$withval"],
+[pic_mode=default])
+test -z "$pic_mode" && pic_mode=default
+# Use C for the default configuration in the libtool script
+tagname=
+AC_LIBTOOL_LANG_C_CONFIG
+_LT_AC_TAGCONFIG
+])# AC_LIBTOOL_SETUP
+# _LT_AC_SYS_COMPILER
+# -------------------
+AC_DEFUN([_LT_AC_SYS_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_AC_SYS_COMPILER
+# _LT_AC_SYS_LIBPATH_AIX
+# ----------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
+[AC_LINK_IFELSE(AC_LANG_PROGRAM,[
+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`
+# Check for a 64-bit object if we didn't find anything.
+if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0  *\(.*\)$/\1/; p; }
+}'`; fi],[])
+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
+])# _LT_AC_SYS_LIBPATH_AIX
+# _LT_AC_SHELL_INIT(ARG)
+# ----------------------
+AC_DEFUN([_LT_AC_SHELL_INIT],
+[ifdef([AC_DIVERSION_NOTICE],
+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
+	 [AC_DIVERT_PUSH(NOTICE)])
+$1
+AC_DIVERT_POP
+])# _LT_AC_SHELL_INIT
+# _LT_AC_PROG_ECHO_BACKSLASH
+# --------------------------
+# Add some code to the start of the generated configure script which
+# will find an echo command which doesn't interpret backslashes.
+AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
+[_LT_AC_SHELL_INIT([
+# Check that we are running under the correct shell.
+SHELL=${CONFIG_SHELL-/bin/sh}
+case X$ECHO in
+X*--fallback-echo)
+# Remove one level of quotation (which was required for Make).
+ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
+;;
+esac
+echo=${ECHO-echo}
+if test "X[$]1" = X--no-reexec; then
+# Discard the --no-reexec flag, and continue.
+shift
+elif test "X[$]1" = X--fallback-echo; then
+# Avoid inline document here, it may be left over
+:
+elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
+# Yippee, $echo works!
+:
+else
+# Restart under the correct shell.
+exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
+fi
+if test "X[$]1" = X--fallback-echo; then
+# used as fallback echo
+shift
+cat <<EOF
+[$]*
+EOF
+exit 0
+fi
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+if test -z "$ECHO"; then
+if test "X${echo_test_string+set}" != Xset; then
+# find a string as large as possible, as long as the shell can cope with it
+for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
+# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
+if (echo_test_string="`eval $cmd`") 2>/dev/null &&
+echo_test_string="`eval $cmd`" &&
+(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
+then
+break
+fi
+done
+fi
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+test "X$echo_testing_string" = "X$echo_test_string"; then
+:
+else
+# The Solaris, AIX, and Digital Unix default echo programs unquote
+# backslashes.  This makes it impossible to quote backslashes using
+#   echo "$something" | sed 's/\\/\\\\/g'
+#
+# So, first we look for a working echo in the user's PATH.
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+for dir in $PATH /usr/ucb; do
+IFS="$lt_save_ifs"
+if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
+test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
+echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
+test "X$echo_testing_string" = "X$echo_test_string"; then
+echo="$dir/echo"
+break
+fi
+done
+IFS="$lt_save_ifs"
+if test "X$echo" = Xecho; then
+# We didn't find a better echo, so look for alternatives.
+if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
+echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
+test "X$echo_testing_string" = "X$echo_test_string"; then
+# This shell has a builtin print -r that does the trick.
+echo='print -r'
+elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
+	 test "X$CONFIG_SHELL" != X/bin/ksh; then
+# If we have ksh, try running configure again with it.
+ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
+export ORIGINAL_CONFIG_SHELL
+CONFIG_SHELL=/bin/ksh
+export CONFIG_SHELL
+exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
+else
+# Try using printf.
+echo='printf %s\n'
+if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
+	 echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
+	 test "X$echo_testing_string" = "X$echo_test_string"; then
+	# Cool, printf works
+	:
+elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
+	export CONFIG_SHELL
+	SHELL="$CONFIG_SHELL"
+	export SHELL
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
+	   test "X$echo_testing_string" = 'X\t' &&
+	   echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
+	   test "X$echo_testing_string" = "X$echo_test_string"; then
+	echo="$CONFIG_SHELL [$]0 --fallback-echo"
+else
+	# maybe with a smaller string...
+	prev=:
+	for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
+	  if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
+	  then
+	    break
+	  fi
+	  prev="$cmd"
+	done
+	if test "$prev" != 'sed 50q "[$]0"'; then
+	  echo_test_string=`eval $prev`
+	  export echo_test_string
+	  exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
+	else
+	  # Oops.  We lost completely, so just stick with echo.
+	  echo=echo
+	fi
+fi
+fi
+fi
+fi
+fi
+# Copy echo and quote the copy suitably for passing to libtool from
+# the Makefile, instead of quoting the original, which is used later.
+ECHO=$echo
+if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
+ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
+fi
+AC_SUBST(ECHO)
+])])# _LT_AC_PROG_ECHO_BACKSLASH
+# _LT_AC_LOCK
+# -----------
+AC_DEFUN([_LT_AC_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+[AC_HELP_STRING([--disable-libtool-lock],
+	[avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+# Find out which ABI we are using.
+echo 'int i;' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+case `/usr/bin/file conftest.$ac_objext` in
+*ELF-32*)
+HPUX_IA64_MODE="32"
+;;
+*ELF-64*)
+HPUX_IA64_MODE="64"
+;;
+esac
+fi
+rm -rf conftest*
+;;
+*-*-irix6*)
+# Find out which ABI we are using.
+echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+if test "$lt_cv_prog_gnu_ld" = yes; then
+case `/usr/bin/file conftest.$ac_objext` in
+*32-bit*)
+LD="${LD-ld} -melf32bsmip"
+;;
+*N32*)
+LD="${LD-ld} -melf32bmipn32"
+;;
+*64-bit*)
+LD="${LD-ld} -melf64bmip"
+;;
+esac
+else
+case `/usr/bin/file conftest.$ac_objext` in
+*32-bit*)
+LD="${LD-ld} -32"
+;;
+*N32*)
+LD="${LD-ld} -n32"
+;;
+*64-bit*)
+LD="${LD-ld} -64"
+;;
+esac
+fi
+fi
+rm -rf conftest*
+;;
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+# Find out which ABI we are using.
+echo 'int i;' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+case "`/usr/bin/file conftest.o`" in
+*32-bit*)
+case $host in
+x86_64-*linux*)
+LD="${LD-ld} -m elf_i386"
+;;
+ppc64-*linux*|powerpc64-*linux*)
+LD="${LD-ld} -m elf32ppclinux"
+;;
+s390x-*linux*)
+LD="${LD-ld} -m elf_s390"
+;;
+sparc64-*linux*)
+LD="${LD-ld} -m elf32_sparc"
+;;
+esac
+;;
+*64-bit*)
+case $host in
+x86_64-*linux*)
+LD="${LD-ld} -m elf_x86_64"
+;;
+ppc*-*linux*|powerpc*-*linux*)
+LD="${LD-ld} -m elf64ppc"
+;;
+s390*-*linux*)
+LD="${LD-ld} -m elf64_s390"
+;;
+sparc*-*linux*)
+LD="${LD-ld} -m elf64_sparc"
+;;
+esac
+;;
+esac
+fi
+rm -rf conftest*
+;;
+*-*-sco3.2v5*)
+# On SCO OpenServer 5, we need -belf to get full-featured binaries.
+SAVE_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS -belf"
+AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+[AC_LANG_PUSH(C)
+AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+AC_LANG_POP])
+if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+CFLAGS="$SAVE_CFLAGS"
+fi
+;;
+AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
+[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
+AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+AC_CHECK_TOOL(AS, as, false)
+AC_CHECK_TOOL(OBJDUMP, objdump, false)
+;;
+])
+esac
+need_locks="$enable_libtool_lock"
+])# _LT_AC_LOCK
+# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
+[AC_REQUIRE([LT_AC_PROG_SED])
+AC_CACHE_CHECK([$1], [$2],
+[$2=no
+ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+lt_compiler_flag="$3"
+# Insert the option either (1) after the last *FLAGS variable, or
+# (2) before a word containing "conftest.", or (3) at the end.
+# Note that $ac_compile itself does not contain backslashes and begins
+# with a dollar sign (not a hyphen), so the echo should work correctly.
+# The option is referenced via a variable to avoid confusing sed.
+lt_compile=`echo "$ac_compile" | $SED \
+-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+-e 's:$: $lt_compiler_flag:'`
+(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+(eval "$lt_compile" 2>conftest.err)
+ac_status=$?
+cat conftest.err >&AS_MESSAGE_LOG_FD
+echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+if (exit $ac_status) && test -s "$ac_outfile"; then
+# The compiler can only warn and ignore the option if not recognized
+# So say no if there are warnings
+if test ! -s conftest.err; then
+$2=yes
+fi
+fi
+$rm conftest*
+])
+if test x"[$]$2" = xyes; then
+ifelse([$5], , :, [$5])
+else
+ifelse([$6], , :, [$6])
+fi
+])# AC_LIBTOOL_COMPILER_OPTION
+# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+#                          [ACTION-SUCCESS], [ACTION-FAILURE])
+# ------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
+[AC_CACHE_CHECK([$1], [$2],
+[$2=no
+save_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS $3"
+printf "$lt_simple_link_test_code" > conftest.$ac_ext
+if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+# The compiler can only warn and ignore the option if not recognized
+# So say no if there are warnings
+if test -s conftest.err; then
+# Append any errors to the config.log.
+cat conftest.err 1>&AS_MESSAGE_LOG_FD
+else
+$2=yes
+fi
+fi
+$rm conftest*
+LDFLAGS="$save_LDFLAGS"
+])
+if test x"[$]$2" = xyes; then
+ifelse([$4], , :, [$4])
+else
+ifelse([$5], , :, [$5])
+fi
+])# AC_LIBTOOL_LINKER_OPTION
+# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# --------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
+[# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+i=0
+teststring="ABCD"
+case $build_os in
+msdosdjgpp*)
+# On DJGPP, this test can blow up pretty badly due to problems in libc
+# (any single argument exceeding 2000 bytes causes a buffer overrun
+# during glob expansion).  Even if it were fixed, the result of this
+# check would be larger than it should be.
+lt_cv_sys_max_cmd_len=12288;    # 12K is about right
+;;
+gnu*)
+# Under GNU Hurd, this test is not required because there is
+# no limit to the length of command line arguments.
+# Libtool will interpret -1 as no limit whatsoever
+lt_cv_sys_max_cmd_len=-1;
+;;
+cygwin* | mingw*)
+# On Win9x/ME, this test blows up -- it succeeds, but takes
+# about 5 minutes as the teststring grows exponentially.
+# Worse, since 9x/ME are not pre-emptively multitasking,
+# you end up with a "frozen" computer, even though with patience
+# the test eventually succeeds (with a max line length of 256k).
+# Instead, let's just punt: use the minimum linelength reported by
+# all of the supported platforms: 8192 (on NT/2K/XP).
+lt_cv_sys_max_cmd_len=8192;
+;;
+amigaos*)
+# On AmigaOS with pdksh, this test takes hours, literally.
+# So we just punt and use a minimum line length of 8192.
+lt_cv_sys_max_cmd_len=8192;
+;;
+*)
+# If test is not a shell built-in, we'll probably end up computing a
+# maximum length that is only half of the actual maximum length, but
+# we can't tell.
+while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
+	       = "XX$teststring") >/dev/null 2>&1 &&
+	    new_result=`expr "X$teststring" : ".*" 2>&1` &&
+	    lt_cv_sys_max_cmd_len=$new_result &&
+	    test $i != 17 # 1/2 MB should be enough
+do
+i=`expr $i + 1`
+teststring=$teststring$teststring
+done
+teststring=
+# Add a significant safety factor because C++ compilers can tack on massive
+# amounts of additional arguments before passing them to the linker.
+# It appears as though 1/2 is a usable value.
+lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+;;
+esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+AC_MSG_RESULT(none)
+fi
+])# AC_LIBTOOL_SYS_MAX_CMD_LEN
+# _LT_AC_CHECK_DLFCN
+# --------------------
+AC_DEFUN([_LT_AC_CHECK_DLFCN],
+[AC_CHECK_HEADERS(dlfcn.h)dnl
+])# _LT_AC_CHECK_DLFCN
+# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+#                           ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ------------------------------------------------------------------
+AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+[$4]
+else
+lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+lt_status=$lt_dlunknown
+cat > conftest.$ac_ext <<EOF
+[#line __oline__ "configure"
+#include "confdefs.h"
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+#include <stdio.h>
+#ifdef RTLD_GLOBAL
+#  define LT_DLGLOBAL		RTLD_GLOBAL
+#else
+#  ifdef DL_GLOBAL
+#    define LT_DLGLOBAL		DL_GLOBAL
+#  else
+#    define LT_DLGLOBAL		0
+#  endif
+#endif
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+#  ifdef RTLD_LAZY
+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
+#  else
+#    ifdef DL_LAZY
+#      define LT_DLLAZY_OR_NOW		DL_LAZY
+#    else
+#      ifdef RTLD_NOW
+#        define LT_DLLAZY_OR_NOW	RTLD_NOW
+#      else
+#        ifdef DL_NOW
+#          define LT_DLLAZY_OR_NOW	DL_NOW
+#        else
+#          define LT_DLLAZY_OR_NOW	0
+#        endif
+#      endif
+#    endif
+#  endif
+#endif
+#ifdef __cplusplus
+extern "C" void exit (int);
+#endif
+void fnord() { int i=42;}
+int main ()
+{
+void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+int status = $lt_dlunknown;
+if (self)
+{
+if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
+else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+/* dlclose (self); */
+}
+exit (status);
+}]
+EOF
+if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+(./conftest; exit; ) 2>/dev/null
+lt_status=$?
+case x$lt_status in
+x$lt_dlno_uscore) $1 ;;
+x$lt_dlneed_uscore) $2 ;;
+x$lt_unknown|x*) $3 ;;
+esac
+else :
+# compilation failed
+$3
+fi
+fi
+rm -fr conftest*
+])# _LT_AC_TRY_DLOPEN_SELF
+# AC_LIBTOOL_DLOPEN_SELF
+# -------------------
+AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
+[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+enable_dlopen=unknown
+enable_dlopen_self=unknown
+enable_dlopen_self_static=unknown
+else
+lt_cv_dlopen=no
+lt_cv_dlopen_libs=
+case $host_os in
+beos*)
+lt_cv_dlopen="load_add_on"
+lt_cv_dlopen_libs=
+lt_cv_dlopen_self=yes
+;;
+mingw* | pw32*)
+lt_cv_dlopen="LoadLibrary"
+lt_cv_dlopen_libs=
+;;
+cygwin*)
+lt_cv_dlopen="dlopen"
+lt_cv_dlopen_libs=
+;;
+darwin*)
+# if libdl is installed we need to link against it
+AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+lt_cv_dlopen="dyld"
+lt_cv_dlopen_libs=
+lt_cv_dlopen_self=yes
+])
+;;
+*)
+AC_CHECK_FUNC([shl_load],
+	  [lt_cv_dlopen="shl_load"],
+[AC_CHECK_LIB([dld], [shl_load],
+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
+	[AC_CHECK_FUNC([dlopen],
+	      [lt_cv_dlopen="dlopen"],
+	  [AC_CHECK_LIB([dl], [dlopen],
+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+	    [AC_CHECK_LIB([svld], [dlopen],
+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+	      [AC_CHECK_LIB([dld], [dld_link],
+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
+	      ])
+	    ])
+	  ])
+	])
+])
+;;
+esac
+if test "x$lt_cv_dlopen" != xno; then
+enable_dlopen=yes
+else
+enable_dlopen=no
+fi
+case $lt_cv_dlopen in
+dlopen)
+save_CPPFLAGS="$CPPFLAGS"
+test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+save_LDFLAGS="$LDFLAGS"
+eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+save_LIBS="$LIBS"
+LIBS="$lt_cv_dlopen_libs $LIBS"
+AC_CACHE_CHECK([whether a program can dlopen itself],
+	  lt_cv_dlopen_self, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+])
+if test "x$lt_cv_dlopen_self" = xyes; then
+LDFLAGS="$LDFLAGS $link_static_flag"
+AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+	  lt_cv_dlopen_self_static, [dnl
+	  _LT_AC_TRY_DLOPEN_SELF(
+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
+])
+fi
+CPPFLAGS="$save_CPPFLAGS"
+LDFLAGS="$save_LDFLAGS"
+LIBS="$save_LIBS"
+;;
+esac
+case $lt_cv_dlopen_self in
+yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+*) enable_dlopen_self=unknown ;;
+esac
+case $lt_cv_dlopen_self_static in
+yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+*) enable_dlopen_self_static=unknown ;;
+esac
+fi
+])# AC_LIBTOOL_DLOPEN_SELF
+# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
+# ---------------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler
+AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+[_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+[_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+$rm -r conftest 2>/dev/null
+mkdir conftest
+cd conftest
+mkdir out
+printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+lt_compiler_flag="-o out/conftest2.$ac_objext"
+# Insert the option either (1) after the last *FLAGS variable, or
+# (2) before a word containing "conftest.", or (3) at the end.
+# Note that $ac_compile itself does not contain backslashes and begins
+# with a dollar sign (not a hyphen), so the echo should work correctly.
+lt_compile=`echo "$ac_compile" | $SED \
+-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
+-e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+-e 's:$: $lt_compiler_flag:'`
+(eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+(eval "$lt_compile" 2>out/conftest.err)
+ac_status=$?
+cat out/conftest.err >&AS_MESSAGE_LOG_FD
+echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+if (exit $ac_status) && test -s out/conftest2.$ac_objext
+then
+# The compiler can only warn and ignore the option if not recognized
+# So say no if there are warnings
+if test ! -s out/conftest.err; then
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+fi
+fi
+chmod u+w .
+$rm conftest*
+# SGI C++ compiler will create directory out/ii_files/ for
+# template instantiation
+test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
+$rm out/* && rmdir out
+cd ..
+rmdir conftest
+$rm conftest*
+])
+])# AC_LIBTOOL_PROG_CC_C_O
+# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
+# -----------------------------------------
+# Check to see if we can do hard links to lock some files if needed
+AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
+[AC_REQUIRE([_LT_AC_LOCK])dnl
+hard_links="nottested"
+if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+# do not overwrite the value of need_locks provided by the user
+AC_MSG_CHECKING([if we can lock with hard links])
+hard_links=yes
+$rm conftest*
+ln conftest.a conftest.b 2>/dev/null && hard_links=no
+touch conftest.a
+ln conftest.a conftest.b 2>&5 || hard_links=no
+ln conftest.a conftest.b 2>/dev/null && hard_links=no
+AC_MSG_RESULT([$hard_links])
+if test "$hard_links" = no; then
+AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+need_locks=warn
+fi
+else
+need_locks=no
+fi
+])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
+# AC_LIBTOOL_OBJDIR
+# -----------------
+AC_DEFUN([AC_LIBTOOL_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+lt_cv_objdir=.libs
+else
+# MS-DOS does not allow filenames that begin with a dot.
+lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+])# AC_LIBTOOL_OBJDIR
+# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
+# ----------------------------------------------
+# Check hardcoding attributes.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_AC_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
+test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \
+test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then
+# We can hardcode non-existant directories.
+if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
+# If the only mechanism to avoid hardcoding is shlibpath_var, we
+# have to relink, otherwise we might link with an installed library
+# when we should be linking with a yet-to-be-installed one
+## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
+# Linking always hardcodes the temporary library directory.
+_LT_AC_TAGVAR(hardcode_action, $1)=relink
+else
+# We can link without hardcoding, and we can hardcode nonexisting dirs.
+_LT_AC_TAGVAR(hardcode_action, $1)=immediate
+fi
+else
+# We cannot hardcode anything, or else we can only hardcode existing
+# directories.
+_LT_AC_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
+if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
+# Fast installation is not supported
+enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+test "$enable_shared" = no; then
+# Fast installation is not necessary
+enable_fast_install=needless
+fi
+])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
+# AC_LIBTOOL_SYS_LIB_STRIP
+# ------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
+[striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
+test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+case $host_os in
+darwin*)
+if test -n "$STRIP" ; then
+striplib="$STRIP -x"
+AC_MSG_RESULT([yes])
+else
+AC_MSG_RESULT([no])
+fi
+;;
+*)
+AC_MSG_RESULT([no])
+;;
+esac
+fi
+])# AC_LIBTOOL_SYS_LIB_STRIP
+# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
+[AC_MSG_CHECKING([dynamic linker characteristics])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+if test "$GCC" = yes; then
+sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then
+# if the path contains ";" then we assume it to be the separator
+# otherwise default to the standard path separator (i.e. ":") - it is
+# assumed that no part of a normal pathname contains ";" but that should
+# okay in the real world where ";" in dirpaths is itself problematic.
+sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+else
+sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+fi
+else
+sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+need_lib_prefix=unknown
+hardcode_into_libs=no
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+case $host_os in
+aix3*)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+shlibpath_var=LIBPATH
+# AIX 3 has no versioning support, so we append a major version to the name.
+soname_spec='${libname}${release}${shared_ext}$major'
+;;
+aix4* | aix5*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+hardcode_into_libs=yes
+if test "$host_cpu" = ia64; then
+# AIX 5 supports IA64
+library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+else
+# With GCC up to 2.95.x, collect2 would create an import file
+# for dependence libraries.  The import file would start with
+# the line `#! .'.  This would cause the generated library to
+# depend on `.', always an invalid library.  This was fixed in
+# development snapshots of GCC prior to 3.0.
+case $host_os in
+aix4 | aix4.[[01]] | aix4.[[01]].*)
+if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+	   echo ' yes '
+	   echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
+	:
+else
+	can_build_shared=no
+fi
+;;
+esac
+# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+# soname into executable. Probably we can add versioning support to
+# collect2, so additional links can be useful in future.
+if test "$aix_use_runtimelinking" = yes; then
+# If using run time linking (on AIX 4.2 or later) use lib<name>.so
+# instead of lib<name>.a to let people know that these are not
+# typical AIX shared libraries.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+else
+# We preserve .a as extension for shared libraries through AIX4.2
+# and later when we are not doing run time linking.
+library_names_spec='${libname}${release}.a $libname.a'
+soname_spec='${libname}${release}${shared_ext}$major'
+fi
+shlibpath_var=LIBPATH
+fi
+;;
+amigaos*)
+library_names_spec='$libname.ixlibrary $libname.a'
+# Create ${libname}_ixlibrary.a entries in /sys/libs.
+finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+;;
+beos*)
+library_names_spec='${libname}${shared_ext}'
+dynamic_linker="$host_os ld.so"
+shlibpath_var=LIBRARY_PATH
+;;
+bsdi4*)
+version_type=linux
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+# the default ld.so.conf also contains /usr/contrib/lib and
+# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+# libtool to hard-code these into programs
+;;
+cygwin* | mingw* | pw32*)
+version_type=windows
+shrext_cmds=".dll"
+need_version=no
+need_lib_prefix=no
+case $GCC,$host_os in
+yes,cygwin* | yes,mingw* | yes,pw32*)
+library_names_spec='$libname.dll.a'
+# DLL is installed to $(libdir)/../bin by postinstall_cmds
+postinstall_cmds='base_file=`basename \${file}`~
+dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
+dldir=$destdir/`dirname \$dlpath`~
+test -d \$dldir || mkdir -p \$dldir~
+$install_prog $dir/$dlname \$dldir/$dlname'
+postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+dlpath=$dir/\$dldll~
+$rm \$dlpath'
+shlibpath_overrides_runpath=yes
+case $host_os in
+cygwin*)
+# Cygwin DLLs use 'cyg' prefix rather than 'lib'
+soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
+;;
+mingw*)
+# MinGW DLLs use traditional 'lib' prefix
+soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
+if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
+# It is most probably a Windows format PATH printed by
+# mingw gcc, but we are running on Cygwin. Gcc prints its search
+# path with ; separators, and with drive letters. We can handle the
+# drive letters (cygwin fileutils understands them), so leave them,
+# especially as we might pass files found there to a mingw objdump,
+# which wouldn't understand a cygwinified path. Ahh.
+sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+else
+sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
+fi
+;;
+pw32*)
+# pw32 DLLs use 'pw' prefix rather than 'lib'
+library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+;;
+esac
+;;
+*)
+library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+;;
+esac
+dynamic_linker='Win32 ld.exe'
+# FIXME: first we should search . and the directory the executable is in
+shlibpath_var=PATH
+;;
+darwin* | rhapsody*)
+dynamic_linker="$host_os dyld"
+version_type=darwin
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+soname_spec='${libname}${release}${major}$shared_ext'
+shlibpath_overrides_runpath=yes
+shlibpath_var=DYLD_LIBRARY_PATH
+shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)'
+# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
+if test "$GCC" = yes; then
+sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
+else
+sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
+fi
+sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+;;
+dgux*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+;;
+freebsd1*)
+dynamic_linker=no
+;;
+kfreebsd*-gnu)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+dynamic_linker='GNU ld.so'
+;;
+freebsd*)
+objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
+version_type=freebsd-$objformat
+case $version_type in
+freebsd-elf*)
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+need_version=no
+need_lib_prefix=no
+;;
+freebsd-*)
+library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+need_version=yes
+;;
+esac
+shlibpath_var=LD_LIBRARY_PATH
+case $host_os in
+freebsd2*)
+shlibpath_overrides_runpath=yes
+;;
+freebsd3.[01]* | freebsdelf3.[01]*)
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+;;
+*) # from 3.2 on
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+;;
+esac
+;;
+gnu*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+hardcode_into_libs=yes
+;;
+hpux9* | hpux10* | hpux11*)
+# Give a soname corresponding to the major version so that dld.sl refuses to
+# link against other versions.
+version_type=sunos
+need_lib_prefix=no
+need_version=no
+case "$host_cpu" in
+ia64*)
+shrext_cmds='.so'
+hardcode_into_libs=yes
+dynamic_linker="$host_os dld.so"
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+if test "X$HPUX_IA64_MODE" = X32; then
+sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+else
+sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+fi
+sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+;;
+hppa*64*)
+shrext_cmds='.sl'
+hardcode_into_libs=yes
+dynamic_linker="$host_os dld.sl"
+shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+;;
+*)
+shrext_cmds='.sl'
+dynamic_linker="$host_os dld.sl"
+shlibpath_var=SHLIB_PATH
+shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+;;
+esac
+# HP-UX runs *really* slowly unless shared libraries are mode 555.
+postinstall_cmds='chmod 555 $lib'
+;;
+irix5* | irix6* | nonstopux*)
+case $host_os in
+nonstopux*) version_type=nonstopux ;;
+*)
+	if test "$lt_cv_prog_gnu_ld" = yes; then
+		version_type=linux
+	else
+		version_type=irix
+	fi ;;
+esac
+need_lib_prefix=no
+need_version=no
+soname_spec='${libname}${release}${shared_ext}$major'
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+case $host_os in
+irix5* | nonstopux*)
+libsuff= shlibsuff=
+;;
+*)
+case $LD in # libtool.m4 will add one of these switches to LD
+*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+libsuff= shlibsuff= libmagic=32-bit;;
+*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+libsuff=32 shlibsuff=N32 libmagic=N32;;
+*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+libsuff=64 shlibsuff=64 libmagic=64-bit;;
+*) libsuff= shlibsuff= libmagic=never-match;;
+esac
+;;
+esac
+shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+shlibpath_overrides_runpath=no
+sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+hardcode_into_libs=yes
+;;
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+dynamic_linker=no
+;;
+# This must be Linux ELF.
+linux*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+# This implies no fast_install, which is unacceptable.
+# Some rework will be needed to allow for fast_install
+# before this can be enabled.
+hardcode_into_libs=yes
+# find out which ABI we are using
+libsuff=
+case "$host_cpu" in
+x86_64*|s390x*|powerpc64*)
+echo '[#]line __oline__ "configure"' > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile); then
+case `/usr/bin/file conftest.$ac_objext` in
+*64-bit*)
+libsuff=64
+sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
+;;
+esac
+fi
+rm -rf conftest*
+;;
+esac
+# Append ld.so.conf contents to the search path
+if test -f /etc/ld.so.conf; then
+lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '`
+sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff} $lt_ld_extra"
+fi
+# We used to test for /lib/ld.so.1 and disable shared libraries on
+# powerpc, because MkLinux only supported shared libraries with the
+# GNU dynamic linker.  Since this was broken with cross compilers,
+# most powerpc-linux boxes support dynamic linking these days and
+# people can always --disable-shared, the test was removed, and we
+# assume the GNU/Linux dynamic linker is in use.
+dynamic_linker='GNU/Linux ld.so'
+;;
+knetbsd*-gnu)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=no
+hardcode_into_libs=yes
+dynamic_linker='GNU ld.so'
+;;
+netbsd*)
+version_type=sunos
+need_lib_prefix=no
+need_version=no
+if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+dynamic_linker='NetBSD (a.out) ld.so'
+else
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+dynamic_linker='NetBSD ld.elf_so'
+fi
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+;;
+newsos6)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+;;
+nto-qnx*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+;;
+openbsd*)
+version_type=sunos
+need_lib_prefix=no
+need_version=yes
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+case $host_os in
+openbsd2.[[89]] | openbsd2.[[89]].*)
+	shlibpath_overrides_runpath=no
+	;;
+*)
+	shlibpath_overrides_runpath=yes
+	;;
+esac
+else
+shlibpath_overrides_runpath=yes
+fi
+;;
+os2*)
+libname_spec='$name'
+shrext_cmds=".dll"
+need_lib_prefix=no
+library_names_spec='$libname${shared_ext} $libname.a'
+dynamic_linker='OS/2 ld.exe'
+shlibpath_var=LIBPATH
+;;
+osf3* | osf4* | osf5*)
+version_type=osf
+need_lib_prefix=no
+need_version=no
+soname_spec='${libname}${release}${shared_ext}$major'
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+;;
+sco3.2v5*)
+version_type=osf
+soname_spec='${libname}${release}${shared_ext}$major'
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+shlibpath_var=LD_LIBRARY_PATH
+;;
+solaris*)
+version_type=linux
+need_lib_prefix=no
+need_version=no
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+hardcode_into_libs=yes
+# ldd complains unless libraries are executable
+postinstall_cmds='chmod +x $lib'
+;;
+sunos4*)
+version_type=sunos
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+shlibpath_var=LD_LIBRARY_PATH
+shlibpath_overrides_runpath=yes
+if test "$with_gnu_ld" = yes; then
+need_lib_prefix=no
+fi
+need_version=yes
+;;
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+case $host_vendor in
+sni)
+shlibpath_overrides_runpath=no
+need_lib_prefix=no
+export_dynamic_flag_spec='${wl}-Blargedynsym'
+runpath_var=LD_RUN_PATH
+;;
+siemens)
+need_lib_prefix=no
+;;
+motorola)
+need_lib_prefix=no
+need_version=no
+shlibpath_overrides_runpath=no
+sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+;;
+esac
+;;
+sysv4*MP*)
+if test -d /usr/nec ;then
+version_type=linux
+library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+soname_spec='$libname${shared_ext}.$major'
+shlibpath_var=LD_LIBRARY_PATH
+fi
+;;
+uts4*)
+version_type=linux
+library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+soname_spec='${libname}${release}${shared_ext}$major'
+shlibpath_var=LD_LIBRARY_PATH
+;;
+*)
+dynamic_linker=no
+;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
+# _LT_AC_TAGCONFIG
+# ----------------
+AC_DEFUN([_LT_AC_TAGCONFIG],
+[AC_ARG_WITH([tags],
+[AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
+[include additional configurations @<:@automatic@:>@])],
+[tagnames="$withval"])
+if test -f "$ltmain" && test -n "$tagnames"; then
+if test ! -f "${ofile}"; then
+AC_MSG_WARN([output file `$ofile' does not exist])
+fi
+if test -z "$LTCC"; then
+eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
+if test -z "$LTCC"; then
+AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
+else
+AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
+fi
+fi
+# Extract list of available tagged configurations in $ofile.
+# Note that this assumes the entire list is on one line.
+available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
+lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+for tagname in $tagnames; do
+IFS="$lt_save_ifs"
+# Check whether tagname contains only valid characters
+case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
+"") ;;
+*)  AC_MSG_ERROR([invalid tag name: $tagname])
+	;;
+esac
+if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
+then
+AC_MSG_ERROR([tag name \"$tagname\" already exists])
+fi
+# Update the list of available tags.
+if test -n "$tagname"; then
+echo appending configuration tag \"$tagname\" to $ofile
+case $tagname in
+CXX)
+	if test -n "$CXX" && test "X$CXX" != "Xno"; then
+	  AC_LIBTOOL_LANG_CXX_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+F77)
+	if test -n "$F77" && test "X$F77" != "Xno"; then
+	  AC_LIBTOOL_LANG_F77_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+GCJ)
+	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
+	  AC_LIBTOOL_LANG_GCJ_CONFIG
+	else
+	  tagname=""
+	fi
+	;;
+RC)
+	AC_LIBTOOL_LANG_RC_CONFIG
+	;;
+*)
+	AC_MSG_ERROR([Unsupported tag name: $tagname])
+	;;
+esac
+# Append the new tag name to the list of available tags.
+if test -n "$tagname" ; then
+available_tags="$available_tags $tagname"
+fi
+fi
+done
+IFS="$lt_save_ifs"
+# Now substitute the updated list of available tags.
+if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
+mv "${ofile}T" "$ofile"
+chmod +x "$ofile"
+else
+rm -f "${ofile}T"
+AC_MSG_ERROR([unable to update list of available tagged configurations.])
+fi
+fi
+])# _LT_AC_TAGCONFIG
+# AC_LIBTOOL_DLOPEN
+# -----------------
+# enable checks for dlopen support
+AC_DEFUN([AC_LIBTOOL_DLOPEN],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_DLOPEN
+# AC_LIBTOOL_WIN32_DLL
+# --------------------
+# declare package support for building win32 dll's
+AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
+])# AC_LIBTOOL_WIN32_DLL
+# AC_ENABLE_SHARED([DEFAULT])
+# ---------------------------
+# implement the --enable-shared flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_SHARED],
+[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([shared],
+[AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+	[build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+enable_shared=no
+# Look at the argument we got.  We use all the common list separators.
+lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_shared=yes
+	fi
+done
+IFS="$lt_save_ifs"
+;;
+esac],
+[enable_shared=]AC_ENABLE_SHARED_DEFAULT)
+])# AC_ENABLE_SHARED
+# AC_DISABLE_SHARED
+# -----------------
+#- set the default shared flag to --disable-shared
+AC_DEFUN([AC_DISABLE_SHARED],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_SHARED(no)
+])# AC_DISABLE_SHARED
+# AC_ENABLE_STATIC([DEFAULT])
+# ---------------------------
+# implement the --enable-static flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_STATIC],
+[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([static],
+[AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+	[build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_static=yes ;;
+no) enable_static=no ;;
+*)
+enable_static=no
+# Look at the argument we got.  We use all the common list separators.
+lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_static=yes
+	fi
+done
+IFS="$lt_save_ifs"
+;;
+esac],
+[enable_static=]AC_ENABLE_STATIC_DEFAULT)
+])# AC_ENABLE_STATIC
+# AC_DISABLE_STATIC
+# -----------------
+# set the default static flag to --disable-static
+AC_DEFUN([AC_DISABLE_STATIC],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_STATIC(no)
+])# AC_DISABLE_STATIC
+# AC_ENABLE_FAST_INSTALL([DEFAULT])
+# ---------------------------------
+# implement the --enable-fast-install flag
+# DEFAULT is either `yes' or `no'.  If omitted, it defaults to `yes'.
+AC_DEFUN([AC_ENABLE_FAST_INSTALL],
+[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
+AC_ARG_ENABLE([fast-install],
+[AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+[optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+[p=${PACKAGE-default}
+case $enableval in
+yes) enable_fast_install=yes ;;
+no) enable_fast_install=no ;;
+*)
+enable_fast_install=no
+# Look at the argument we got.  We use all the common list separators.
+lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+for pkg in $enableval; do
+	IFS="$lt_save_ifs"
+	if test "X$pkg" = "X$p"; then
+	  enable_fast_install=yes
+	fi
+done
+IFS="$lt_save_ifs"
+;;
+esac],
+[enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
+])# AC_ENABLE_FAST_INSTALL
+# AC_DISABLE_FAST_INSTALL
+# -----------------------
+# set the default to --disable-fast-install
+AC_DEFUN([AC_DISABLE_FAST_INSTALL],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_ENABLE_FAST_INSTALL(no)
+])# AC_DISABLE_FAST_INSTALL
+# AC_LIBTOOL_PICMODE([MODE])
+# --------------------------
+# implement the --with-pic flag
+# MODE is either `yes' or `no'.  If omitted, it defaults to `both'.
+AC_DEFUN([AC_LIBTOOL_PICMODE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+pic_mode=ifelse($#,1,$1,default)
+])# AC_LIBTOOL_PICMODE
+# AC_PROG_EGREP
+# -------------
+# This is predefined starting with Autoconf 2.54, so this conditional
+# definition can be removed once we require Autoconf 2.54 or later.
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
+[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
+[if echo a | (grep -E '(a|b)') >/dev/null 2>&1
+then ac_cv_prog_egrep='grep -E'
+else ac_cv_prog_egrep='egrep'
+fi])
+EGREP=$ac_cv_prog_egrep
+AC_SUBST([EGREP])
+])])
+# AC_PATH_TOOL_PREFIX
+# -------------------
+# find a file program which can recognise shared library
+AC_DEFUN([AC_PATH_TOOL_PREFIX],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] |  ?:[\\/]*])
+lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+;;
+*)
+lt_save_MAGIC_CMD="$MAGIC_CMD"
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word.  This closes a longstanding sh security hole.
+ac_dummy="ifelse([$2], , $PATH, [$2])"
+for ac_dir in $ac_dummy; do
+IFS="$lt_save_ifs"
+test -z "$ac_dir" && ac_dir=.
+if test -f $ac_dir/$1; then
+lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+if test -n "$file_magic_test_file"; then
+	case $deplibs_check_method in
+	"file_magic "*)
+	  file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+	    $EGREP "$file_magic_regex" > /dev/null; then
+	    :
+	  else
+	    cat <<EOF 1>&2
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such.  This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem.  Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+EOF
+	  fi ;;
+	esac
+fi
+break
+fi
+done
+IFS="$lt_save_ifs"
+MAGIC_CMD="$lt_save_MAGIC_CMD"
+;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+AC_MSG_RESULT($MAGIC_CMD)
+else
+AC_MSG_RESULT(no)
+fi
+])# AC_PATH_TOOL_PREFIX
+# AC_PATH_MAGIC
+# -------------
+# find a file program which can recognise a shared library
+AC_DEFUN([AC_PATH_MAGIC],
+[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+if test -n "$ac_tool_prefix"; then
+AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+else
+MAGIC_CMD=:
+fi
+fi
+])# AC_PATH_MAGIC
+# AC_PROG_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([AC_PROG_LD],
+[AC_ARG_WITH([gnu-ld],
+[AC_HELP_STRING([--with-gnu-ld],
+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
+[test "$withval" = no || with_gnu_ld=yes],
+[with_gnu_ld=no])
+AC_REQUIRE([LT_AC_PROG_SED])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+ac_prog=ld
+if test "$GCC" = yes; then
+# Check if gcc -print-prog-name=ld gives a path.
+AC_MSG_CHECKING([for ld used by $CC])
+case $host in
+*-*-mingw*)
+# gcc leaves a trailing carriage return which upsets mingw
+ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+*)
+ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+esac
+case $ac_prog in
+# Accept absolute paths.
+[[\\/]]* | ?:[[\\/]]*)
+re_direlt='/[[^/]][[^/]]*/\.\./'
+# Canonicalize the pathname of ld
+ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
+while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
+	ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
+done
+test -z "$LD" && LD="$ac_prog"
+;;
+"")
+# If it fails, then pretend we aren't using GCC.
+ac_prog=ld
+;;
+*)
+# If it is relative, then search for the first ld in PATH.
+with_gnu_ld=unknown
+;;
+esac
+elif test "$with_gnu_ld" = yes; then
+AC_MSG_CHECKING([for GNU ld])
+else
+AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+for ac_dir in $PATH; do
+IFS="$lt_save_ifs"
+test -z "$ac_dir" && ac_dir=.
+if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+lt_cv_path_LD="$ac_dir/$ac_prog"
+# Check to see if the program is GNU ld.  I'd rather use --version,
+# but apparently some GNU ld's only accept -v.
+# Break only if it was the GNU/non-GNU ld that we prefer.
+case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+	test "$with_gnu_ld" != no && break
+	;;
+*)
+	test "$with_gnu_ld" != yes && break
+	;;
+esac
+fi
+done
+IFS="$lt_save_ifs"
+else
+lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+AC_MSG_RESULT($LD)
+else
+AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+AC_PROG_LD_GNU
+])# AC_PROG_LD
+# AC_PROG_LD_GNU
+# --------------
+AC_DEFUN([AC_PROG_LD_GNU],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+lt_cv_prog_gnu_ld=yes
+;;
+*)
+lt_cv_prog_gnu_ld=no
+;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# AC_PROG_LD_GNU
+# AC_PROG_LD_RELOAD_FLAG
+# ----------------------
+# find reload flag for linker
+#   -- PORTME Some linkers may need a different reload flag.
+AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+lt_cv_ld_reload_flag,
+[lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+])# AC_PROG_LD_RELOAD_FLAG
+# AC_DEPLIBS_CHECK_METHOD
+# -----------------------
+# how to check for library dependencies
+#  -- PORTME fill in with the dynamic library characteristics
+AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
+[AC_CACHE_CHECK([how to recognise dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+case $host_os in
+aix4* | aix5*)
+lt_cv_deplibs_check_method=pass_all
+;;
+beos*)
+lt_cv_deplibs_check_method=pass_all
+;;
+bsdi4*)
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+lt_cv_file_magic_cmd='/usr/bin/file -L'
+lt_cv_file_magic_test_file=/shlib/libc.so
+;;
+cygwin*)
+# func_win32_libid is a shell function defined in ltmain.sh
+lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+lt_cv_file_magic_cmd='func_win32_libid'
+;;
+mingw* | pw32*)
+# Base MSYS/MinGW do not provide the 'file' command needed by
+# func_win32_libid shell function, so use a weaker test based on 'objdump'.
+lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+lt_cv_file_magic_cmd='$OBJDUMP -f'
+;;
+darwin* | rhapsody*)
+lt_cv_deplibs_check_method=pass_all
+;;
+freebsd* | kfreebsd*-gnu)
+if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+case $host_cpu in
+i*86 )
+# Not sure whether the presence of OpenBSD here was a mistake.
+# Let's accept both of them until this is cleared up.
+lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library'
+lt_cv_file_magic_cmd=/usr/bin/file
+lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+;;
+esac
+else
+lt_cv_deplibs_check_method=pass_all
+fi
+;;
+gnu*)
+lt_cv_deplibs_check_method=pass_all
+;;
+hpux10.20* | hpux11*)
+lt_cv_file_magic_cmd=/usr/bin/file
+case "$host_cpu" in
+ia64*)
+lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+;;
+hppa*64*)
+[lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
+lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+;;
+*)
+lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
+lt_cv_file_magic_test_file=/usr/lib/libc.sl
+;;
+esac
+;;
+irix5* | irix6* | nonstopux*)
+case $LD in
+*-32|*"-32 ") libmagic=32-bit;;
+*-n32|*"-n32 ") libmagic=N32;;
+*-64|*"-64 ") libmagic=64-bit;;
+*) libmagic=never-match;;
+esac
+lt_cv_deplibs_check_method=pass_all
+;;
+# This must be Linux ELF.
+linux*)
+case $host_cpu in
+alpha*|hppa*|i*86|ia64*|m68*|mips*|powerpc*|sparc*|s390*|sh*|x86_64*)
+lt_cv_deplibs_check_method=pass_all ;;
+*)
+# glibc up to 2.1.1 does not perform some relocations on ARM
+# this will be overridden with pass_all, but let us keep it just in case
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;;
+esac
+lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+lt_cv_deplibs_check_method=pass_all
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+else
+lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+fi
+;;
+newos6*)
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+lt_cv_file_magic_cmd=/usr/bin/file
+lt_cv_file_magic_test_file=/usr/lib/libnls.so
+;;
+nto-qnx*)
+lt_cv_deplibs_check_method=unknown
+;;
+openbsd*)
+lt_cv_file_magic_cmd=/usr/bin/file
+lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object'
+else
+lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
+fi
+;;
+osf3* | osf4* | osf5*)
+lt_cv_deplibs_check_method=pass_all
+;;
+sco3.2v5*)
+lt_cv_deplibs_check_method=pass_all
+;;
+solaris*)
+lt_cv_deplibs_check_method=pass_all
+;;
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+case $host_vendor in
+motorola)
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+;;
+ncr)
+lt_cv_deplibs_check_method=pass_all
+;;
+sequent)
+lt_cv_file_magic_cmd='/bin/file'
+lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+;;
+sni)
+lt_cv_file_magic_cmd='/bin/file'
+lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+lt_cv_file_magic_test_file=/lib/libc.so
+;;
+siemens)
+lt_cv_deplibs_check_method=pass_all
+;;
+esac
+;;
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*)
+lt_cv_deplibs_check_method=pass_all
+;;
+esac
+])
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+])# AC_DEPLIBS_CHECK_METHOD
+# AC_PROG_NM
+# ----------
+# find the pathname to a BSD-compatible name lister
+AC_DEFUN([AC_PROG_NM],
+[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
+[if test -n "$NM"; then
+# Let the user override the test.
+lt_cv_path_NM="$NM"
+else
+lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
+IFS="$lt_save_ifs"
+test -z "$ac_dir" && ac_dir=.
+tmp_nm="$ac_dir/${ac_tool_prefix}nm"
+if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+# Check to see if the nm accepts a BSD-compat flag.
+# Adding the `sed 1q' prevents false positives on HP-UX, which says:
+#   nm: unknown option "B" ignored
+# Tru64's nm complains that /dev/null is an invalid object file
+case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+*/dev/null* | *'Invalid file or object type'*)
+	lt_cv_path_NM="$tmp_nm -B"
+	break
+;;
+*)
+	case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+	*/dev/null*)
+	  lt_cv_path_NM="$tmp_nm -p"
+	  break
+	  ;;
+	*)
+	  lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+	  continue # so that we can try to find one that supports BSD flags
+	  ;;
+	esac
+esac
+fi
+done
+IFS="$lt_save_ifs"
+test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
+fi])
+NM="$lt_cv_path_NM"
+])# AC_PROG_NM
+# AC_CHECK_LIBM
+# -------------
+# check for math library
+AC_DEFUN([AC_CHECK_LIBM],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
+# These system don't have libm, or don't need it
+;;
+*-ncr-sysv4.3*)
+AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+;;
+*)
+AC_CHECK_LIB(m, cos, LIBM="-lm")
+;;
+esac
+])# AC_CHECK_LIBM
+# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl convenience library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-convenience to the configure arguments.  Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
+# DIRECTORY is not provided, it is assumed to be `libltdl'.  LIBLTDL will
+# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with
+# '${top_srcdir}/' (note the single quotes!).  If your package is not
+# flat and you're not using automake, define top_builddir and
+# top_srcdir appropriately in the Makefiles.
+AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+case $enable_ltdl_convenience in
+no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
+"") enable_ltdl_convenience=yes
+ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
+esac
+LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
+LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_CONVENIENCE
+# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
+# -----------------------------------
+# sets LIBLTDL to the link flags for the libltdl installable library and
+# LTDLINCL to the include flags for the libltdl header and adds
+# --enable-ltdl-install to the configure arguments.  Note that LIBLTDL
+# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called.  If
+# DIRECTORY is not provided and an installed libltdl is not found, it is
+# assumed to be `libltdl'.  LIBLTDL will be prefixed with '${top_builddir}/'
+# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single
+# quotes!).  If your package is not flat and you're not using automake,
+# define top_builddir and top_srcdir appropriately in the Makefiles.
+# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
+AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
+[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
+AC_CHECK_LIB(ltdl, lt_dlinit,
+[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
+[if test x"$enable_ltdl_install" = xno; then
+AC_MSG_WARN([libltdl not installed, but installation disabled])
+else
+enable_ltdl_install=yes
+fi
+])
+if test x"$enable_ltdl_install" = x"yes"; then
+ac_configure_args="$ac_configure_args --enable-ltdl-install"
+LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
+LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
+else
+ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
+LIBLTDL="-lltdl"
+LTDLINCL=
+fi
+# For backwards non-gettext consistent compatibility...
+INCLTDL="$LTDLINCL"
+])# AC_LIBLTDL_INSTALLABLE
+# AC_LIBTOOL_CXX
+# --------------
+# enable support for C++ libraries
+AC_DEFUN([AC_LIBTOOL_CXX],
+[AC_REQUIRE([_LT_AC_LANG_CXX])
+])# AC_LIBTOOL_CXX
+# _LT_AC_LANG_CXX
+# ---------------
+AC_DEFUN([_LT_AC_LANG_CXX],
+[AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX])
+])# _LT_AC_LANG_CXX
+# AC_LIBTOOL_F77
+# --------------
+# enable support for Fortran 77 libraries
+AC_DEFUN([AC_LIBTOOL_F77],
+[AC_REQUIRE([_LT_AC_LANG_F77])
+])# AC_LIBTOOL_F77
+# _LT_AC_LANG_F77
+# ---------------
+AC_DEFUN([_LT_AC_LANG_F77],
+[AC_REQUIRE([AC_PROG_F77])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77])
+])# _LT_AC_LANG_F77
+# AC_LIBTOOL_GCJ
+# --------------
+# enable support for GCJ libraries
+AC_DEFUN([AC_LIBTOOL_GCJ],
+[AC_REQUIRE([_LT_AC_LANG_GCJ])
+])# AC_LIBTOOL_GCJ
+# _LT_AC_LANG_GCJ
+# ---------------
+AC_DEFUN([_LT_AC_LANG_GCJ],
+[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
+[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
+[AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[],
+[ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
+	 [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
+	   [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ])
+])# _LT_AC_LANG_GCJ
+# AC_LIBTOOL_RC
+# --------------
+# enable support for Windows resource files
+AC_DEFUN([AC_LIBTOOL_RC],
+[AC_REQUIRE([LT_AC_PROG_RC])
+_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
+])# AC_LIBTOOL_RC
+# AC_LIBTOOL_LANG_C_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
+AC_DEFUN([_LT_AC_LANG_C_CONFIG],
+[lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+# Source file extension for C test sources.
+ac_ext=c
+# Object file extension for compiled C test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}\n'
+_LT_AC_SYS_COMPILER
+#
+# Check for any special shared library compilation flags.
+#
+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)=
+if test "$GCC" = no; then
+case $host_os in
+sco3.2v5*)
+_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf'
+;;
+esac
+fi
+if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then
+AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries])
+if echo "$old_CC $old_CFLAGS " | grep "[[ 	]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ 	]]" >/dev/null; then :
+else
+AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure])
+_LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no
+fi
+fi
+#
+# Check to make sure the static flag actually works.
+#
+AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works],
+_LT_AC_TAGVAR(lt_prog_compiler_static_works, $1),
+$_LT_AC_TAGVAR(lt_prog_compiler_static, $1),
+[],
+[_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+# Report which librarie types wil actually be built
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+test "$enable_shared" = yes && enable_static=no
+if test -n "$RANLIB"; then
+archive_cmds="$archive_cmds~\$RANLIB \$lib"
+postinstall_cmds='$RANLIB $lib'
+fi
+;;
+aix4* | aix5*)
+if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+test "$enable_shared" = yes && enable_static=no
+fi
+;;
+darwin* | rhapsody*)
+if test "$GCC" = yes; then
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+case "$host_os" in
+rhapsody* | darwin1.[[012]])
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+;;
+*) # Darwin 1.3 on
+if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+else
+case ${MACOSX_DEPLOYMENT_TARGET} in
+10.[[012]])
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+;;
+10.*)
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+;;
+esac
+fi
+;;
+esac
+output_verbose_link_cmd='echo'
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring'
+_LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag  -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+else
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+esac
+AC_MSG_RESULT([$enable_shared])
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+AC_LIBTOOL_CONFIG($1)
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_C_CONFIG
+# AC_LIBTOOL_LANG_CXX_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)])
+AC_DEFUN([_LT_AC_LANG_CXX_CONFIG],
+[AC_LANG_PUSH(C++)
+AC_REQUIRE([AC_PROG_CXX])
+AC_REQUIRE([AC_PROG_CXXCPP])
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# Dependencies to place before and after the object being linked:
+_LT_AC_TAGVAR(predep_objects, $1)=
+_LT_AC_TAGVAR(postdep_objects, $1)=
+_LT_AC_TAGVAR(predeps, $1)=
+_LT_AC_TAGVAR(postdeps, $1)=
+_LT_AC_TAGVAR(compiler_lib_search_path, $1)=
+# Source file extension for C++ test sources.
+ac_ext=cc
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;\n"
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n'
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_LD=$LD
+lt_save_GCC=$GCC
+GCC=$GXX
+lt_save_with_gnu_ld=$with_gnu_ld
+lt_save_path_LD=$lt_cv_path_LD
+if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+else
+unset lt_cv_prog_gnu_ld
+fi
+if test -n "${lt_cv_path_LDCXX+set}"; then
+lt_cv_path_LD=$lt_cv_path_LDCXX
+else
+unset lt_cv_path_LD
+fi
+test -z "${LDCXX+set}" || LD=$LDCXX
+CC=${CXX-"c++"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+# We don't want -fno-exception wen compiling C++ code, so set the
+# no_builtin_flag separately
+if test "$GXX" = yes; then
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+else
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+fi
+if test "$GXX" = yes; then
+# Set up default GNU C++ configuration
+AC_PROG_LD
+# Check if GNU C++ uses GNU ld as the underlying linker, since the
+# archiving commands below assume that GNU ld is being used.
+if test "$with_gnu_ld" = yes; then
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+# If archive_cmds runs LD, not CC, wlarc should be empty
+# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+#     investigate it a little bit more. (MM)
+wlarc='${wl}'
+# ancient GNU ld didn't support --whole-archive et. al.
+if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
+	grep 'no-whole-archive' > /dev/null; then
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+else
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+fi
+else
+with_gnu_ld=no
+wlarc=
+# A generic and very simple default shared library creation
+# command for GNU C++ for the case where it uses the native
+# linker, instead of GNU ld.  If possible, this setting should
+# overridden to take advantage of the native linker features on
+# the platform it is being used on.
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+fi
+# Commands to make compiler produce verbose output that lists
+# what "hidden" libraries, object files and flags are used when
+# linking a shared library.
+output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+else
+GXX=no
+with_gnu_ld=no
+wlarc=
+fi
+# PORTME: fill in a description of your system's C++ link characteristics
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+case $host_os in
+aix3*)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+aix4* | aix5*)
+if test "$host_cpu" = ia64; then
+# On IA64, the linker does run time linking by default, so we don't
+# have to do anything special.
+aix_use_runtimelinking=no
+exp_sym_flag='-Bexport'
+no_entry_flag=""
+else
+aix_use_runtimelinking=no
+# Test if we are trying to use run time linking or normal
+# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+# need to do runtime linking.
+case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	for ld_flag in $LDFLAGS; do
+	  case $ld_flag in
+	  *-brtl*)
+	    aix_use_runtimelinking=yes
+	    break
+	    ;;
+	  esac
+	done
+esac
+exp_sym_flag='-bexport'
+no_entry_flag='-bnoentry'
+fi
+# When large executables or shared objects are built, AIX ld can
+# have problems creating the table of contents.  If linking a library
+# or program results in "error TOC overflow" add -mminimal-toc to
+# CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+_LT_AC_TAGVAR(archive_cmds, $1)=''
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+if test "$GXX" = yes; then
+case $host_os in aix4.[012]|aix4.[012].*)
+# We only want to do this on AIX 4.2 and lower, the check
+# below for broken collect2 doesn't work under 4.3+
+	collect2name=`${CC} -print-prog-name=collect2`
+	if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	then
+	  # We have reworked collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	else
+	  # We have old collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	fi
+esac
+shared_flag='-shared'
+else
+# not using gcc
+if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	shared_flag='-G'
+else
+	if test "$aix_use_runtimelinking" = yes; then
+	  shared_flag='${wl}-G'
+	else
+	  shared_flag='${wl}-bM:SRE'
+	fi
+fi
+fi
+# It seems that -bexpall does not export symbols beginning with
+# underscore (_), so it is better to generate a list of symbols to export.
+_LT_AC_TAGVAR(always_export_symbols, $1)=yes
+if test "$aix_use_runtimelinking" = yes; then
+# Warning - without using the other runtime loading flags (-brtl),
+# -berok will link without error, but may produce a broken library.
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+# Determine the default libpath from the value encoded in an empty executable.
+_LT_AC_SYS_LIBPATH_AIX
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+else
+if test "$host_cpu" = ia64; then
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+else
+	# Determine the default libpath from the value encoded in an empty executable.
+	_LT_AC_SYS_LIBPATH_AIX
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	# Warning - without using the other run time loading flags,
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	# -bexpall does not export symbols beginning with underscore (_)
+	_LT_AC_TAGVAR(always_export_symbols, $1)=yes
+	# Exported symbols can be pulled into shared objects from archives
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	# This is similar to how AIX traditionally builds it's shared libraries.
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+fi
+fi
+;;
+chorus*)
+case $cc_basename in
+*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+esac
+;;
+cygwin* | mingw* | pw32*)
+# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+# as there is no search path for DLLs.
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+# If the export-symbols file already is a .def file (1st line
+# is EXPORTS), use it as is; otherwise, prepend...
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	cp $export_symbols $output_objdir/$soname.def;
+else
+	echo EXPORTS > $output_objdir/$soname.def;
+	cat $export_symbols >> $output_objdir/$soname.def;
+fi~
+$CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+else
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+darwin* | rhapsody*)
+if test "$GXX" = yes; then
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+case "$host_os" in
+rhapsody* | darwin1.[[012]])
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+;;
+*) # Darwin 1.3 on
+if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+else
+case ${MACOSX_DEPLOYMENT_TARGET} in
+10.[[012]])
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+;;
+10.*)
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+;;
+esac
+fi
+;;
+esac
+lt_int_apple_cc_single_mod=no
+output_verbose_link_cmd='echo'
+if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+lt_int_apple_cc_single_mod=yes
+fi
+if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+else
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+fi
+_LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+else
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+fi
+_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+else
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+dgux*)
+case $cc_basename in
+ec++)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+ghcx)
+	# Green Hills C++ Compiler
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+esac
+;;
+freebsd[12]*)
+# C++ shared libraries reported to be fairly broken before switch to ELF
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+freebsd-elf*)
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+;;
+freebsd* | kfreebsd*-gnu)
+# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+# conventions
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+;;
+gnu*)
+;;
+hpux9*)
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+				# but as the default
+				# location of the library.
+case $cc_basename in
+CC)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+aCC)
+_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+# Commands to make compiler produce verbose output that lists
+# what "hidden" libraries, object files and flags are used when
+# linking a shared library.
+#
+# There doesn't appear to be a way to prevent this compiler from
+# explicitly linking system object files so we need to strip them
+# from the output so that they don't get included in the library
+# dependencies.
+output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+;;
+*)
+if test "$GXX" = yes; then
+_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+else
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+esac
+;;
+hpux10*|hpux11*)
+if test $with_gnu_ld = no; then
+case "$host_cpu" in
+hppa*64*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+;;
+ia64*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+;;
+*)
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+;;
+esac
+fi
+case "$host_cpu" in
+hppa*64*)
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+ia64*)
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+;;
+*)
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+					      # but as the default
+					      # location of the library.
+;;
+esac
+case $cc_basename in
+CC)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+aCC)
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	  ;;
+	esac
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+*)
+	if test "$GXX" = yes; then
+	  if test $with_gnu_ld = no; then
+	    case "$host_cpu" in
+	    ia64*|hppa*64*)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	      ;;
+	    esac
+	  fi
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+esac
+;;
+irix5* | irix6*)
+case $cc_basename in
+CC)
+	# SGI C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	# Archives containing C++ object files must be created using
+	# "CC -ar", where "CC" is the IRIX C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+	;;
+*)
+	if test "$GXX" = yes; then
+	  if test "$with_gnu_ld" = no; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  else
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
+	  fi
+	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+	;;
+esac
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+;;
+linux*)
+case $cc_basename in
+KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+icpc)
+	# Intel C++
+	with_gnu_ld=yes
+	_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+	;;
+cxx)
+	# Compaq C++
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+	runpath_var=LD_RUN_PATH
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+esac
+;;
+lynxos*)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+m88k*)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+mvs*)
+case $cc_basename in
+cxx)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+esac
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+wlarc=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+fi
+# Workaround some broken pre-1.5 toolchains
+output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+;;
+osf3*)
+case $cc_basename in
+KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	# Archives containing C++ object files must be created using
+	# "CC -Bstatic", where "CC" is the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+	;;
+RCC)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+cxx)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+*)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+esac
+;;
+osf4* | osf5*)
+case $cc_basename in
+KCC)
+	# Kuck and Associates, Inc. (KAI) C++ Compiler
+	# KCC will only create a shared library if the output file
+	# ends with ".so" (or ".sl" for HP-UX), so rename the library
+	# to its proper name (with version) after linking.
+	_LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	# Archives containing C++ object files must be created using
+	# the KAI C++ compiler.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs'
+	;;
+RCC)
+	# Rational C++ 2.4.1
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+cxx)
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+	  echo "-hidden">> $lib.exp~
+	  $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp  `test -n "$verstring" && echo -set_version	$verstring` -update_registry $objdir/so_locations -o $lib~
+	  $rm $lib.exp'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+	_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	;;
+*)
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	 _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	  # Commands to make compiler produce verbose output that lists
+	  # what "hidden" libraries, object files and flags are used when
+	  # linking a shared library.
+	  output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
+	else
+	  # FIXME: insert proper C++ library support
+	  _LT_AC_TAGVAR(ld_shlibs, $1)=no
+	fi
+	;;
+esac
+;;
+psos*)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+sco*)
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+case $cc_basename in
+CC)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+esac
+;;
+sunos4*)
+case $cc_basename in
+CC)
+	# Sun C++ 4.x
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+lcc)
+	# Lucid
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+esac
+;;
+solaris*)
+case $cc_basename in
+CC)
+	# Sun C++ 4.2, 5.x and Centerline C++
+	_LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	case $host_os in
+	  solaris2.[0-5] | solaris2.[0-5].*) ;;
+	  *)
+	    # The C++ compiler is used as linker so we must use $wl
+	    # flag to pass the commands to the underlying system
+	    # linker.
+	    # Supported since Solaris 2.6 (maybe 2.5.1?)
+	    _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+	    ;;
+	esac
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+	# Commands to make compiler produce verbose output that lists
+	# what "hidden" libraries, object files and flags are used when
+	# linking a shared library.
+	#
+	# There doesn't appear to be a way to prevent this compiler from
+	# explicitly linking system object files so we need to strip them
+	# from the output so that they don't get included in the library
+	# dependencies.
+	output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
+	# Archives containing C++ object files must be created using
+	# "CC -xar", where "CC" is the Sun C++ compiler.  This is
+	# necessary to make sure instantiated templates are included
+	# in the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+	;;
+gcx)
+	# Green Hills C++ Compiler
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	# The C++ compiler must be used to create the archive.
+	_LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+	;;
+*)
+	# GNU C++ compiler with Solaris linker
+	if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+	  if $CC --version | grep -v '^2\.7' > /dev/null; then
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  else
+	    # g++ 2.7 appears to require `-G' NOT `-shared' on this
+	    # platform.
+	    _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+	    _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp'
+	    # Commands to make compiler produce verbose output that lists
+	    # what "hidden" libraries, object files and flags are used when
+	    # linking a shared library.
+	    output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
+	  fi
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+	fi
+	;;
+esac
+;;
+sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*)
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+;;
+tandem*)
+case $cc_basename in
+NCC)
+	# NonStop-UX NCC 3.20
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+*)
+	# FIXME: insert proper C++ library support
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	;;
+esac
+;;
+vxworks*)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+*)
+# FIXME: insert proper C++ library support
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+esac
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+_LT_AC_TAGVAR(GCC, $1)="$GXX"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+AC_LIBTOOL_POSTDEP_PREDEP($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+AC_LIBTOOL_CONFIG($1)
+AC_LANG_POP
+CC=$lt_save_CC
+LDCXX=$LD
+LD=$lt_save_LD
+GCC=$lt_save_GCC
+with_gnu_ldcxx=$with_gnu_ld
+with_gnu_ld=$lt_save_with_gnu_ld
+lt_cv_path_LDCXX=$lt_cv_path_LD
+lt_cv_path_LD=$lt_save_path_LD
+lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+])# AC_LIBTOOL_LANG_CXX_CONFIG
+# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
+# ------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library.  It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
+int a;
+void foo (void) { a = 0; }
+EOF
+],[$1],[CXX],[cat > conftest.$ac_ext <<EOF
+class Foo
+{
+public:
+Foo (void) { a = 0; }
+private:
+int a;
+};
+EOF
+],[$1],[F77],[cat > conftest.$ac_ext <<EOF
+subroutine foo
+implicit none
+integer*4 a
+a=0
+return
+end
+EOF
+],[$1],[GCJ],[cat > conftest.$ac_ext <<EOF
+public class foo {
+private int a;
+public void bar (void) {
+a = 0;
+}
+};
+EOF
+])
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+# Sentinel used to keep track of whether or not we are before
+# the conftest object file.
+pre_test_object_deps_done=no
+# The `*' in the case matches for architectures that use `case' in
+# $output_verbose_cmd can trigger glob expansion during the loop
+# eval without this substitution.
+output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
+for p in `eval $output_verbose_link_cmd`; do
+case $p in
+-L* | -R* | -l*)
+# Some compilers place space between "-{L,R}" and the path.
+# Remove the space.
+if test $p = "-L" \
+	  || test $p = "-R"; then
+	 prev=$p
+	 continue
+else
+	 prev=
+fi
+if test "$pre_test_object_deps_done" = no; then
+	 case $p in
+	 -L* | -R*)
+	   # Internal compiler library paths should come after those
+	   # provided the user.  The postdeps already come after the
+	   # user supplied libs so there is no need to process them.
+	   if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+	   else
+	     _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+	   fi
+	   ;;
+	 # The "-l" case would never come before the object being
+	 # linked, so don't bother handling this case.
+	 esac
+else
+	 if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
+	   _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
+	 else
+	   _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
+	 fi
+fi
+;;
+*.$objext)
+# This assumes that the test object file only shows up
+# once in the compiler output.
+if test "$p" = "conftest.$objext"; then
+	 pre_test_object_deps_done=yes
+	 continue
+fi
+if test "$pre_test_object_deps_done" = no; then
+	 if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
+	   _LT_AC_TAGVAR(predep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
+	 fi
+else
+	 if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$p"
+	 else
+	   _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
+	 fi
+fi
+;;
+*) ;; # Ignore the rest.
+esac
+done
+# Clean up.
+rm -f a.out a.exe
+else
+echo "libtool.m4: error: problem compiling $1 test program"
+fi
+$rm -f confest.$objext
+case " $_LT_AC_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+])# AC_LIBTOOL_POSTDEP_PREDEP
+# AC_LIBTOOL_LANG_F77_CONFIG
+# ------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)])
+AC_DEFUN([_LT_AC_LANG_F77_CONFIG],
+[AC_REQUIRE([AC_PROG_F77])
+AC_LANG_PUSH(Fortran 77)
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_AC_TAGVAR(no_undefined_flag, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+# Source file extension for f77 test sources.
+ac_ext=f
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="      subroutine t\n      return\n      end\n"
+# Code to be used in simple link tests
+lt_simple_link_test_code="      program t\n      end\n"
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${F77-"f77"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
+AC_MSG_CHECKING([if libtool supports shared libraries])
+AC_MSG_RESULT([$can_build_shared])
+AC_MSG_CHECKING([whether to build shared libraries])
+test "$can_build_shared" = "no" && enable_shared=no
+# On AIX, shared libraries and static libraries use the same namespace, and
+# are all built from PIC.
+case "$host_os" in
+aix3*)
+test "$enable_shared" = yes && enable_static=no
+if test -n "$RANLIB"; then
+archive_cmds="$archive_cmds~\$RANLIB \$lib"
+postinstall_cmds='$RANLIB $lib'
+fi
+;;
+aix4* | aix5*)
+test "$enable_shared" = yes && enable_static=no
+;;
+esac
+AC_MSG_RESULT([$enable_shared])
+AC_MSG_CHECKING([whether to build static libraries])
+# Make sure either enable_shared or enable_static is yes.
+test "$enable_shared" = yes || enable_static=yes
+AC_MSG_RESULT([$enable_static])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+_LT_AC_TAGVAR(GCC, $1)="$G77"
+_LT_AC_TAGVAR(LD, $1)="$LD"
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_CONFIG($1)
+AC_LANG_POP
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_F77_CONFIG
+# AC_LIBTOOL_LANG_GCJ_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the C compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)])
+AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG],
+[AC_LANG_SAVE
+# Source file extension for Java test sources.
+ac_ext=java
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}\n"
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n'
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${GCJ-"gcj"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
+AC_LIBTOOL_PROG_COMPILER_PIC($1)
+AC_LIBTOOL_PROG_CC_C_O($1)
+AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
+AC_LIBTOOL_PROG_LD_SHLIBS($1)
+AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
+AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
+AC_LIBTOOL_SYS_LIB_STRIP
+AC_LIBTOOL_DLOPEN_SELF($1)
+AC_LIBTOOL_CONFIG($1)
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_GCJ_CONFIG
+# AC_LIBTOOL_LANG_RC_CONFIG
+# --------------------------
+# Ensure that the configuration vars for the Windows resource compiler are
+# suitably defined.  Those variables are subsequently used by
+# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
+AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
+AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
+[AC_LANG_SAVE
+# Source file extension for RC test sources.
+ac_ext=rc
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_AC_TAGVAR(objext, $1)=$objext
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_AC_SYS_COMPILER
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+CC=${RC-"windres"}
+compiler=$CC
+_LT_AC_TAGVAR(compiler, $1)=$CC
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+AC_LIBTOOL_CONFIG($1)
+AC_LANG_RESTORE
+CC="$lt_save_CC"
+])# AC_LIBTOOL_LANG_RC_CONFIG
+# AC_LIBTOOL_CONFIG([TAGNAME])
+# ----------------------------
+# If TAGNAME is not passed, then create an initial libtool script
+# with a default configuration from the untagged config vars.  Otherwise
+# add code to config.status for appending the configuration named by
+# TAGNAME from the matching tagged config vars.
+AC_DEFUN([AC_LIBTOOL_CONFIG],
+[# The else clause should only fire when bootstrapping the
+# libtool distribution, otherwise you forgot to ship ltmain.sh
+# with your package, and you will get complaints that there are
+# no rules to generate ltmain.sh.
+if test -f "$ltmain"; then
+# See if we are running on zsh, and set the options which allow our commands through
+# without removal of \ escapes.
+if test -n "${ZSH_VERSION+set}" ; then
+setopt NO_GLOB_SUBST
+fi
+# Now quote all the things that may contain metacharacters while being
+# careful not to overquote the AC_SUBSTed values.  We take copies of the
+# variables and quote the copies for generation of the libtool script.
+for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \
+SED SHELL STRIP \
+libname_spec library_names_spec soname_spec extract_expsyms_cmds \
+old_striplib striplib file_magic_cmd finish_cmds finish_eval \
+deplibs_check_method reload_flag reload_cmds need_locks \
+lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_c_name_address \
+sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
+old_postinstall_cmds old_postuninstall_cmds \
+_LT_AC_TAGVAR(compiler, $1) \
+_LT_AC_TAGVAR(CC, $1) \
+_LT_AC_TAGVAR(LD, $1) \
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
+_LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
+_LT_AC_TAGVAR(old_archive_cmds, $1) \
+_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
+_LT_AC_TAGVAR(predep_objects, $1) \
+_LT_AC_TAGVAR(postdep_objects, $1) \
+_LT_AC_TAGVAR(predeps, $1) \
+_LT_AC_TAGVAR(postdeps, $1) \
+_LT_AC_TAGVAR(compiler_lib_search_path, $1) \
+_LT_AC_TAGVAR(archive_cmds, $1) \
+_LT_AC_TAGVAR(archive_expsym_cmds, $1) \
+_LT_AC_TAGVAR(postinstall_cmds, $1) \
+_LT_AC_TAGVAR(postuninstall_cmds, $1) \
+_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
+_LT_AC_TAGVAR(allow_undefined_flag, $1) \
+_LT_AC_TAGVAR(no_undefined_flag, $1) \
+_LT_AC_TAGVAR(export_symbols_cmds, $1) \
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
+_LT_AC_TAGVAR(hardcode_automatic, $1) \
+_LT_AC_TAGVAR(module_cmds, $1) \
+_LT_AC_TAGVAR(module_expsym_cmds, $1) \
+_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
+_LT_AC_TAGVAR(exclude_expsyms, $1) \
+_LT_AC_TAGVAR(include_expsyms, $1); do
+case $var in
+_LT_AC_TAGVAR(old_archive_cmds, $1) | \
+_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
+_LT_AC_TAGVAR(archive_cmds, $1) | \
+_LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
+_LT_AC_TAGVAR(module_cmds, $1) | \
+_LT_AC_TAGVAR(module_expsym_cmds, $1) | \
+_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
+_LT_AC_TAGVAR(export_symbols_cmds, $1) | \
+extract_expsyms_cmds | reload_cmds | finish_cmds | \
+postinstall_cmds | postuninstall_cmds | \
+old_postinstall_cmds | old_postuninstall_cmds | \
+sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
+# Double-quote double-evaled strings.
+eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
+;;
+*)
+eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
+;;
+esac
+done
+case $lt_echo in
+*'\[$]0 --fallback-echo"')
+lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
+;;
+esac
+ifelse([$1], [],
+[cfgfile="${ofile}T"
+trap "$rm \"$cfgfile\"; exit 1" 1 2 15
+$rm -f "$cfgfile"
+AC_MSG_NOTICE([creating $ofile])],
+[cfgfile="$ofile"])
+cat <<__EOF__ >> "$cfgfile"
+ifelse([$1], [],
+[#! $SHELL
+# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
+# Free Software Foundation, Inc.
+#
+# This file is part of GNU Libtool:
+# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+# A sed program that does not truncate output.
+SED=$lt_SED
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="$SED -e s/^X//"
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
+# The names of the tagged configurations supported by this script.
+available_tags=
+# ### BEGIN LIBTOOL CONFIG],
+[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
+# Whether or not to disallow shared libs when runtime libs are static
+allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+# The host system.
+host_alias=$host_alias
+host=$host
+# An echo program that does not interpret backslashes.
+echo=$lt_echo
+# The archiver.
+AR=$lt_AR
+AR_FLAGS=$lt_AR_FLAGS
+# A C compiler.
+LTCC=$lt_LTCC
+# A language-specific compiler.
+CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
+# Is the compiler the GNU C compiler?
+with_gcc=$_LT_AC_TAGVAR(GCC, $1)
+# An ERE matcher.
+EGREP=$lt_EGREP
+# The linker used to build libraries.
+LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
+# Whether we need hard or soft links.
+LN_S=$lt_LN_S
+# A BSD-compatible nm program.
+NM=$lt_NM
+# A symbol stripping program
+STRIP=$lt_STRIP
+# Used to examine libraries when file_magic_cmd begins "file"
+MAGIC_CMD=$MAGIC_CMD
+# Used on cygwin: DLL creation program.
+DLLTOOL="$DLLTOOL"
+# Used on cygwin: object dumper.
+OBJDUMP="$OBJDUMP"
+# Used on cygwin: assembler.
+AS="$AS"
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+# How to pass a linker flag through the compiler.
+wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+# Object file suffix (normally "o").
+objext="$ac_objext"
+# Old archive suffix (normally "a").
+libext="$libext"
+# Shared library suffix (normally ".so").
+shrext_cmds='$shrext_cmds'
+# Executable file suffix (normally "").
+exeext="$exeext"
+# Additional compiler flags for building library objects.
+pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
+pic_mode=$pic_mode
+# What is the maximum length of a command?
+max_cmd_len=$lt_cv_sys_max_cmd_len
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
+# Must we lock files when doing compilation ?
+need_locks=$lt_need_locks
+# Do we need the lib prefix for modules?
+need_lib_prefix=$need_lib_prefix
+# Do we need a version for libraries?
+need_version=$need_version
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
+# Compiler flag to generate thread-safe objects.
+thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
+# Library versioning type.
+version_type=$version_type
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+# List of archive names.  First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME.
+library_names_spec=$lt_library_names_spec
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+# Commands used to build and install an old-style archive.
+RANLIB=$lt_RANLIB
+old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
+# Commands used to build and install a shared archive.
+archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
+archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
+postinstall_cmds=$lt_postinstall_cmds
+postuninstall_cmds=$lt_postuninstall_cmds
+# Commands used to build a loadable module (assumed same as above if empty)
+module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
+module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
+# Dependencies to place before the objects being linked to create a
+# shared library.
+predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
+# Dependencies to place after the objects being linked to create a
+# shared library.
+postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
+# The library search path used internally by the compiler when linking
+# a shared library.
+compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+# Command to use when deplibs_check_method == file_magic.
+file_magic_cmd=$lt_file_magic_cmd
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
+# Flag that forces no undefined symbols.
+no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+# Same as above, but a single script fragment to be evaled but not shown.
+finish_eval=$lt_finish_eval
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+# Transform the output of nm in a proper C declaration
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm in a C name address pair
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+# This is the shared library runtime path variable.
+runpath_var=$runpath_var
+# This is the shared library path variable.
+shlibpath_var=$shlibpath_var
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+# How to hardcode a shared library path into an executable.
+hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist.
+hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
+# If ld is used when linking, flag to hardcode \$libdir into
+# a binary during linking. This must work even if \$libdir does
+# not exist.
+hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
+# Whether we need a single -rpath flag with a separated argument.
+hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
+# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
+# resulting binary.
+hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
+# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
+# resulting binary.
+hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
+# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
+# the resulting binary.
+hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
+# Set to yes if building a shared library automatically hardcodes DIR into the library
+# and all subsequent libraries and executables linked against it.
+hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at relink time.
+variables_saved_for_relink="$variables_saved_for_relink"
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
+# Compile-time system search path for libraries
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+# Run-time system search path for libraries
+sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Fix the shell variable \$srcfile for the compiler.
+fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)"
+# Set to yes if exported symbols are required.
+always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
+# Symbols that must always be exported.
+include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
+ifelse([$1],[],
+[# ### END LIBTOOL CONFIG],
+[# ### END LIBTOOL TAG CONFIG: $tagname])
+__EOF__
+ifelse([$1],[], [
+case $host_os in
+aix3*)
+cat <<\EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program.  For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+COLLECT_NAMES=
+export COLLECT_NAMES
+fi
+EOF
+;;
+esac
+# We use sed instead of cat because bash on DJGPP gets confused if
+# if finds mixed CR/LF and LF-only lines.  Since sed operates in
+# text mode, it properly converts lines to CR/LF.  This bash problem
+# is reportedly fixed, but why not run on old versions too?
+sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
+mv -f "$cfgfile" "$ofile" || \
+(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+chmod +x "$ofile"
+])
+else
+# If there is no Makefile yet, we rely on a make rule to execute
+# `config.status --recheck' to rerun these tests and create the
+# libtool script then.
+ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
+if test -f "$ltmain_in"; then
+test -f Makefile && make "$ltmain"
+fi
+fi
+])# AC_LIBTOOL_CONFIG
+# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
+[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+if test "$GCC" = yes; then
+_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+lt_cv_prog_compiler_rtti_exceptions,
+[-fno-rtti -fno-exceptions], [],
+[_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
+# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# ---------------------------------
+AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
+[AC_REQUIRE([AC_CANONICAL_HOST])
+AC_REQUIRE([AC_PROG_NM])
+AC_REQUIRE([AC_OBJEXT])
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+# Transform the above into a raw symbol and a C symbol.
+symxfrm='\1 \2\3 \3'
+# Transform an extracted symbol line into a proper C declaration
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+# Define system-specific variables.
+case $host_os in
+aix*)
+symcode='[[BCDT]]'
+;;
+cygwin* | mingw* | pw32*)
+symcode='[[ABCDGISTW]]'
+;;
+hpux*) # Its linker distinguishes data from code symbols
+if test "$host_cpu" = ia64; then
+symcode='[[ABCDEGRST]]'
+fi
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
+;;
+irix* | nonstopux*)
+symcode='[[BCDEGRST]]'
+;;
+osf*)
+symcode='[[BCDEGQRST]]'
+;;
+solaris* | sysv5*)
+symcode='[[BDRT]]'
+;;
+sysv4)
+symcode='[[DFNSTU]]'
+;;
+esac
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+;;
+esac
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+symcode='[[ABCDGIRSTW]]' ;;
+esac
+# Try without a prefix undercore, then with it.
+for ac_symprfx in "" "_"; do
+# Write the raw and C identifiers.
+lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ 	]]\($symcode$symcode*\)[[ 	]][[ 	]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
+# Check to see that the pipe works correctly.
+pipe_works=no
+rm -f conftest*
+cat > conftest.$ac_ext <<EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+EOF
+if AC_TRY_EVAL(ac_compile); then
+# Now try to grab the symbols.
+nlist=conftest.nm
+if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
+# Try sorting and uniquifying the output.
+if sort "$nlist" | uniq > "$nlist"T; then
+	mv -f "$nlist"T "$nlist"
+else
+	rm -f "$nlist"T
+fi
+# Make sure that we snagged all the symbols we need.
+if grep ' nm_test_var$' "$nlist" >/dev/null; then
+	if grep ' nm_test_func$' "$nlist" >/dev/null; then
+	  cat <<EOF > conftest.$ac_ext
+#ifdef __cplusplus
+extern "C" {
+#endif
+EOF
+	  # Now generate the symbol file.
+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
+	  cat <<EOF >> conftest.$ac_ext
+#if defined (__STDC__) && __STDC__
+# define lt_ptr_t void *
+#else
+# define lt_ptr_t char *
+# define const
+#endif
+/* The mapping between symbol names and symbols. */
+const struct {
+const char *name;
+lt_ptr_t address;
+}
+lt_preloaded_symbols[[]] =
+{
+EOF
+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
+	  cat <<\EOF >> conftest.$ac_ext
+{0, (lt_ptr_t) 0}
+};
+#ifdef __cplusplus
+}
+#endif
+EOF
+	  # Now try linking the two files.
+	  mv conftest.$ac_objext conftstm.$ac_objext
+	  lt_save_LIBS="$LIBS"
+	  lt_save_CFLAGS="$CFLAGS"
+	  LIBS="conftstm.$ac_objext"
+	  CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+	    pipe_works=yes
+	  fi
+	  LIBS="$lt_save_LIBS"
+	  CFLAGS="$lt_save_CFLAGS"
+	else
+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+	fi
+else
+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+fi
+else
+echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+fi
+else
+echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+cat conftest.$ac_ext >&5
+fi
+rm -f conftest* conftst*
+# Do not use the global_symbol_pipe unless it works.
+if test "$pipe_works" = yes; then
+break
+else
+lt_cv_sys_global_symbol_pipe=
+fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+AC_MSG_RESULT(failed)
+else
+AC_MSG_RESULT(ok)
+fi
+]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
+# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
+# ---------------------------------------
+AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
+[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
+AC_MSG_CHECKING([for $compiler option to produce PIC])
+ifelse([$1],[CXX],[
+# C++ specific cases for pic, static, wl, etc.
+if test "$GXX" = yes; then
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+case $host_os in
+aix*)
+# All AIX code is PIC.
+if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+fi
+;;
+amigaos*)
+# FIXME: we need at least 68020 code to build shared libraries, but
+# adding the `-m68020' flag to GCC prevents building anything better,
+# like `-m68040'.
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+;;
+beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+# PIC is the default for these OSes.
+;;
+mingw* | os2* | pw32*)
+# This hack is so that the source file can tell whether it is being
+# built for inclusion in a dll (and should export symbols for example).
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+;;
+darwin* | rhapsody*)
+# PIC is the default on this platform
+# Common symbols not allowed in MH_DYLIB files
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+;;
+*djgpp*)
+# DJGPP does not support shared libraries at all
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+;;
+sysv4*MP*)
+if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+fi
+;;
+hpux*)
+# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+# not for PA HP-UX.
+case "$host_cpu" in
+hppa*64*|ia64*)
+	;;
+*)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+esac
+;;
+*)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+;;
+esac
+else
+case $host_os in
+aix4* | aix5*)
+	# All AIX code is PIC.
+	if test "$host_cpu" = ia64; then
+	  # AIX 5 now supports IA64 processor
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	else
+	  _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+	fi
+	;;
+chorus*)
+	case $cc_basename in
+	cxch68)
+	  # Green Hills C++ Compiler
+	  # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+	  ;;
+	esac
+	;;
+dgux*)
+	case $cc_basename in
+	  ec++)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  ghcx)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+freebsd* | kfreebsd*-gnu)
+	# FreeBSD uses GNU C++
+	;;
+hpux9* | hpux10* | hpux11*)
+	case $cc_basename in
+	  CC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    if test "$host_cpu" != ia64; then
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	    fi
+	    ;;
+	  aCC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
+	    case "$host_cpu" in
+	    hppa*64*|ia64*)
+	      # +Z the default
+	      ;;
+	    *)
+	      _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	      ;;
+	    esac
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+irix5* | irix6* | nonstopux*)
+	case $cc_basename in
+	  CC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    # CC pic flag -KPIC is the default.
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+linux*)
+	case $cc_basename in
+	  KCC)
+	    # KAI C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  icpc)
+	    # Intel C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+	    ;;
+	  cxx)
+	    # Compaq C++
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+lynxos*)
+	;;
+m88k*)
+	;;
+mvs*)
+	case $cc_basename in
+	  cxx)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+netbsd*)
+	;;
+osf3* | osf4* | osf5*)
+	case $cc_basename in
+	  KCC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+	    ;;
+	  RCC)
+	    # Rational C++ 2.4.1
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  cxx)
+	    # Digital/Compaq C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	    # Make sure the PIC flag is empty.  It appears that all Alpha
+	    # Linux and Compaq Tru64 Unix objects are PIC.
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+psos*)
+	;;
+sco*)
+	case $cc_basename in
+	  CC)
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+solaris*)
+	case $cc_basename in
+	  CC)
+	    # Sun C++ 4.2, 5.x and Centerline C++
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+	    ;;
+	  gcx)
+	    # Green Hills C++ Compiler
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+sunos4*)
+	case $cc_basename in
+	  CC)
+	    # Sun C++ 4.x
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+	    ;;
+	  lcc)
+	    # Lucid
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+tandem*)
+	case $cc_basename in
+	  NCC)
+	    # NonStop-UX NCC 3.20
+	    _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	    ;;
+	  *)
+	    ;;
+	esac
+	;;
+unixware*)
+	;;
+vxworks*)
+	;;
+*)
+	_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+	;;
+esac
+fi
+],
+[
+if test "$GCC" = yes; then
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+case $host_os in
+aix*)
+# All AIX code is PIC.
+if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+fi
+;;
+amigaos*)
+# FIXME: we need at least 68020 code to build shared libraries, but
+# adding the `-m68020' flag to GCC prevents building anything better,
+# like `-m68040'.
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+;;
+beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+# PIC is the default for these OSes.
+;;
+mingw* | pw32* | os2*)
+# This hack is so that the source file can tell whether it is being
+# built for inclusion in a dll (and should export symbols for example).
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+;;
+darwin* | rhapsody*)
+# PIC is the default on this platform
+# Common symbols not allowed in MH_DYLIB files
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+;;
+msdosdjgpp*)
+# Just because we use GCC doesn't mean we suddenly get shared libraries
+# on systems that don't support them.
+_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+enable_shared=no
+;;
+sysv4*MP*)
+if test -d /usr/nec; then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+fi
+;;
+hpux*)
+# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+# not for PA HP-UX.
+case "$host_cpu" in
+hppa*64*|ia64*)
+	# +Z the default
+	;;
+*)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+	;;
+esac
+;;
+*)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+;;
+esac
+else
+# PORTME Check for flag to pass linker flags through the system compiler.
+case $host_os in
+aix*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+if test "$host_cpu" = ia64; then
+	# AIX 5 now supports IA64 processor
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+else
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+fi
+;;
+mingw* | pw32* | os2*)
+# This hack is so that the source file can tell whether it is being
+# built for inclusion in a dll (and should export symbols for example).
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
+;;
+hpux9* | hpux10* | hpux11*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+# not for PA HP-UX.
+case "$host_cpu" in
+hppa*64*|ia64*)
+	# +Z the default
+	;;
+*)
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+	;;
+esac
+# Is there a better lt_prog_compiler_static that works with the bundled CC?
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+;;
+irix5* | irix6* | nonstopux*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# PIC (with -KPIC) is the default.
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+newsos6)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+linux*)
+case $CC in
+icc* | ecc*)
+	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
+;;
+ccc*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# All Alpha code is PIC.
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+esac
+;;
+osf3* | osf4* | osf5*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+# All OSF/1 code is PIC.
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+;;
+sco3.2v5*)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn'
+;;
+solaris*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+sunos4*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+sysv4*MP*)
+if test -d /usr/nec ;then
+	_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+	_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+fi
+;;
+uts4*)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+_LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+;;
+*)
+_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+;;
+esac
+fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
+AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
+_LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1),
+[$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [],
+[case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
+"" | " "*) ;;
+*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+esac],
+[_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+case "$host_os" in
+# For platforms which do not support PIC, -DPIC is meaningless:
+*djgpp*)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
+;;
+*)
+_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])"
+;;
+esac
+])
+# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
+# ------------------------------------
+# See if the linker supports building shared libraries.
+AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
+[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ifelse([$1],[CXX],[
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+case $host_os in
+aix4* | aix5*)
+# If we're using GNU nm, then we don't want the "-C" option.
+# -C means demangle to AIX nm, but means don't demangle with GNU nm
+if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+else
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+fi
+;;
+pw32*)
+_LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+;;
+cygwin* | mingw*)
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+;;
+*)
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+;;
+esac
+],[
+runpath_var=
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+_LT_AC_TAGVAR(archive_cmds, $1)=
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)=
+_LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
+_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_AC_TAGVAR(hardcode_automatic, $1)=no
+_LT_AC_TAGVAR(module_cmds, $1)=
+_LT_AC_TAGVAR(module_expsym_cmds, $1)=
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+# include_expsyms should be a list of space-separated symbols to be *always*
+# included in the symbol list
+_LT_AC_TAGVAR(include_expsyms, $1)=
+# exclude_expsyms can be an extended regexp of symbols to exclude
+# it will be wrapped by ` (' and `)$', so one must not match beginning or
+# end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+# as well as any symbol that contains `d'.
+_LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
+# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+# platforms (ab)use it in PIC code, but their linkers get confused if
+# the symbol is explicitly referenced.  Since portable code cannot
+# rely on this symbol name, it's probably fine to never include it in
+# preloaded symbol tables.
+extract_expsyms_cmds=
+case $host_os in
+cygwin* | mingw* | pw32*)
+# FIXME: the MSVC++ port hasn't been tested in a loooong time
+# When not using gcc, we currently assume that we are using
+# Microsoft Visual C++.
+if test "$GCC" != yes; then
+with_gnu_ld=no
+fi
+;;
+openbsd*)
+with_gnu_ld=no
+;;
+esac
+_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+if test "$with_gnu_ld" = yes; then
+# If archive_cmds runs LD, not CC, wlarc should be empty
+wlarc='${wl}'
+# See if GNU ld supports shared libraries.
+case $host_os in
+aix3* | aix4* | aix5*)
+# On AIX/PPC, the GNU linker is very broken
+if test "$host_cpu" != ia64; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+*** Warning: the GNU linker, at least up to release 2.9.1, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support.  If you
+*** really care for shared libraries, you may want to modify your PATH
+*** so that a non-GNU linker is found, and then restart.
+EOF
+fi
+;;
+amigaos*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
+# that the semantics of dynamic libraries on AmigaOS, at least up
+# to version 4, is to share data among multiple programs linked
+# with the same dynamic library.  Since this doesn't match the
+# behavior of shared libraries on other platforms, we can't use
+# them.
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+beos*)
+if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+	# support --undefined.  This deserves some investigation.  FIXME
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+cygwin* | mingw* | pw32*)
+# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+# as there is no search path for DLLs.
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_AC_TAGVAR(always_export_symbols, $1)=no
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+_LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
+if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
+	# If the export-symbols file already is a .def file (1st line
+	# is EXPORTS), use it as is; otherwise, prepend...
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+	  cp $export_symbols $output_objdir/$soname.def;
+	else
+	  echo EXPORTS > $output_objdir/$soname.def;
+	  cat $export_symbols >> $output_objdir/$soname.def;
+	fi~
+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000  ${wl}--out-implib,$lib'
+else
+	ld_shlibs=no
+fi
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+	wlarc=
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+fi
+;;
+solaris* | sysv5*)
+if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+	cat <<EOF 1>&2
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems.  Therefore, libtool
+*** is disabling shared libraries support.  We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer.  Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+EOF
+elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+sunos4*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+wlarc=
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+linux*)
+if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds"
+supports_anon_versioning=no
+case `$LD -v 2>/dev/null` in
+*\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+*\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+*\ 2.11.*) ;; # other 2.11 versions
+*) supports_anon_versioning=yes ;;
+esac
+if test $supports_anon_versioning = yes; then
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
+cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+$echo "local: *; };" >> $output_objdir/$libname.ver~
+$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+else
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds"
+fi
+else
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+*)
+if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+else
+	_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+esac
+if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then
+runpath_var=LD_RUN_PATH
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+# ancient GNU ld didn't support --whole-archive et. al.
+if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+else
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
+fi
+fi
+else
+# PORTME fill in a description of your system's linker (not GNU ld)
+case $host_os in
+aix3*)
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_AC_TAGVAR(always_export_symbols, $1)=yes
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+# Note: this linker hardcodes the directories in LIBPATH if there
+# are no directories specified by -L.
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+if test "$GCC" = yes && test -z "$link_static_flag"; then
+	# Neither direct hardcoding nor static linking is supported with a
+	# broken collect2.
+	_LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+fi
+;;
+aix4* | aix5*)
+if test "$host_cpu" = ia64; then
+	# On IA64, the linker does run time linking by default, so we don't
+	# have to do anything special.
+	aix_use_runtimelinking=no
+	exp_sym_flag='-Bexport'
+	no_entry_flag=""
+else
+	# If we're using GNU nm, then we don't want the "-C" option.
+	# -C means demangle to AIX nm, but means don't demangle with GNU nm
+	if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	else
+	  _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
+	fi
+	aix_use_runtimelinking=no
+	# Test if we are trying to use run time linking or normal
+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
+	# need to do runtime linking.
+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
+	  for ld_flag in $LDFLAGS; do
+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+	    aix_use_runtimelinking=yes
+	    break
+	  fi
+	  done
+	esac
+	exp_sym_flag='-bexport'
+	no_entry_flag='-bnoentry'
+fi
+# When large executables or shared objects are built, AIX ld can
+# have problems creating the table of contents.  If linking a library
+# or program results in "error TOC overflow" add -mminimal-toc to
+# CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
+# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+_LT_AC_TAGVAR(archive_cmds, $1)=''
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+if test "$GCC" = yes; then
+	case $host_os in aix4.[012]|aix4.[012].*)
+	# We only want to do this on AIX 4.2 and lower, the check
+	# below for broken collect2 doesn't work under 4.3+
+	  collect2name=`${CC} -print-prog-name=collect2`
+	  if test -f "$collect2name" && \
+	   strings "$collect2name" | grep resolve_lib_name >/dev/null
+	  then
+	  # We have reworked collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  else
+	  # We have old collect2
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
+	  # It fails to find uninstalled libraries when the uninstalled
+	  # path is not listed in the libpath.  Setting hardcode_minus_L
+	  # to unsupported forces relinking
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
+	  fi
+	esac
+	shared_flag='-shared'
+else
+	# not using gcc
+	if test "$host_cpu" = ia64; then
+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+	# chokes on -Wl,-G. The following line is correct:
+	  shared_flag='-G'
+	else
+	if test "$aix_use_runtimelinking" = yes; then
+	    shared_flag='${wl}-G'
+	  else
+	    shared_flag='${wl}-bM:SRE'
+	fi
+	fi
+fi
+# It seems that -bexpall does not export symbols beginning with
+# underscore (_), so it is better to generate a list of symbols to export.
+_LT_AC_TAGVAR(always_export_symbols, $1)=yes
+if test "$aix_use_runtimelinking" = yes; then
+	# Warning - without using the other runtime loading flags (-brtl),
+	# -berok will link without error, but may produce a broken library.
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
+# Determine the default libpath from the value encoded in an empty executable.
+_LT_AC_SYS_LIBPATH_AIX
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+else
+	if test "$host_cpu" = ia64; then
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
+	else
+	 # Determine the default libpath from the value encoded in an empty executable.
+	 _LT_AC_SYS_LIBPATH_AIX
+	 _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+	  # Warning - without using the other run time loading flags,
+	  # -berok will link without error, but may produce a broken library.
+	  _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+	  _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+	  # -bexpall does not export symbols beginning with underscore (_)
+	  _LT_AC_TAGVAR(always_export_symbols, $1)=yes
+	  # Exported symbols can be pulled into shared objects from archives
+	  _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' '
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+	  # This is similar to how AIX traditionally builds it's shared libraries.
+	  _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+	fi
+fi
+;;
+amigaos*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+# see comment about different semantics on the GNU ld section
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+bsdi4*)
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+;;
+cygwin* | mingw* | pw32*)
+# When not using gcc, we currently assume that we are using
+# Microsoft Visual C++.
+# hardcode_libdir_flag_spec is actually meaningless, as there is
+# no search path for DLLs.
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+# Tell ltmain to make .lib files, not .a files.
+libext=lib
+# Tell ltmain to make .dll files, not .so files.
+shrext_cmds=".dll"
+# FIXME: Setting linknames here is a bad hack.
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
+# The linker will automatically build a .lib file if we build a DLL.
+_LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
+# FIXME: Should let the user specify the lib program.
+_LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs'
+fix_srcfile_path='`cygpath -w "$srcfile"`'
+_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+;;
+darwin* | rhapsody*)
+if test "$GXX" = yes ; then
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+case "$host_os" in
+rhapsody* | darwin1.[[012]])
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress'
+	;;
+*) # Darwin 1.3 on
+if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+else
+case ${MACOSX_DEPLOYMENT_TARGET} in
+10.[[012]])
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress'
+;;
+10.*)
+_LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup'
+;;
+esac
+fi
+	;;
+esac
+	lt_int_apple_cc_single_mod=no
+	output_verbose_link_cmd='echo'
+	if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
+	  lt_int_apple_cc_single_mod=yes
+	fi
+	if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+	else
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
+fi
+_LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
+# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
+if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+else
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+fi
+_LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[    ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag  -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
+_LT_AC_TAGVAR(hardcode_direct, $1)=no
+_LT_AC_TAGVAR(hardcode_automatic, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience'
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+else
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+fi
+;;
+dgux*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+freebsd1*)
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+# support.  Future versions do this automatically, but an explicit c++rt0.o
+# does not break anything, and helps significantly (at the cost of a little
+# extra space).
+freebsd2.2*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+# Unfortunately, older versions of FreeBSD 2 do not have this feature.
+freebsd2*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+freebsd* | kfreebsd*-gnu)
+_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+hpux9*)
+if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+fi
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+# hardcode_minus_L: Not really in the search PATH,
+# but as the default location of the library.
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+;;
+hpux10* | hpux11*)
+if test "$GCC" = yes -a "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+	  ;;
+	esac
+else
+	case "$host_cpu" in
+	hppa*64*|ia64*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+	  ;;
+	esac
+fi
+if test "$with_gnu_ld" = no; then
+	case "$host_cpu" in
+	hppa*64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  ;;
+	ia64*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+	  _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	*)
+	  _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+	  _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes
+	  _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+	  # hardcode_minus_L: Not really in the search PATH,
+	  # but as the default location of the library.
+	  _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+	  ;;
+	esac
+fi
+;;
+irix5* | irix6* | nonstopux*)
+if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
+fi
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+;;
+netbsd*)
+if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
+fi
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+newsos6)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+openbsd*)
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+else
+case $host_os in
+	 openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+	   ;;
+	 *)
+	   _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+	   _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+	   ;;
+esac
+fi
+;;
+os2*)
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
+_LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+_LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+;;
+osf3*)
+if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+fi
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+;;
+osf4* | osf5*)	# as osf3* with the addition of -msym flag
+if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+else
+	_LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
+	$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
+	# Both c and cxx compiler support -rpath directly
+	_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+fi
+_LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
+;;
+sco3.2v5*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+runpath_var=LD_RUN_PATH
+hardcode_runpath_var=yes
+;;
+solaris*)
+_LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	  $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+	$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+fi
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+case $host_os in
+solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+*) # Supported since Solaris 2.6 (maybe 2.5.1?)
+	_LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;;
+esac
+_LT_AC_TAGVAR(link_all_deplibs, $1)=yes
+;;
+sunos4*)
+if test "x$host_vendor" = xsequent; then
+	# Use $CC to link under sequent, because it throws in some extra .o
+	# files that make .init and .fini sections work.
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+fi
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+sysv4)
+case $host_vendor in
+	sni)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+	;;
+	siemens)
+	  ## LD is ld it makes a PLAMLIB
+	  ## CC just makes a GrossModule.
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no
+;;
+	motorola)
+	  _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	  _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+	;;
+esac
+runpath_var='LD_RUN_PATH'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+sysv4.3*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+;;
+sysv4*MP*)
+if test -d /usr/nec; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+	_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+	runpath_var=LD_RUN_PATH
+	hardcode_runpath_var=yes
+	_LT_AC_TAGVAR(ld_shlibs, $1)=yes
+fi
+;;
+sysv4.2uw2*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_direct, $1)=yes
+_LT_AC_TAGVAR(hardcode_minus_L, $1)=no
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+hardcode_runpath_var=yes
+runpath_var=LD_RUN_PATH
+;;
+sysv5OpenUNIX8* | sysv5UnixWare7* |  sysv5uw[[78]]* | unixware7*)
+_LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text'
+if test "$GCC" = yes; then
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+else
+	_LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+fi
+runpath_var='LD_RUN_PATH'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+sysv5*)
+_LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
+# $CC -shared without GNU ld will not create a library from C++
+# object files and a static libstdc++, better avoid it by now
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
+		$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+runpath_var='LD_RUN_PATH'
+;;
+uts4*)
+_LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
+;;
+*)
+_LT_AC_TAGVAR(ld_shlibs, $1)=no
+;;
+esac
+fi
+])
+AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
+test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+# Assume -lc should be added
+_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+if test "$enable_shared" = yes && test "$GCC" = yes; then
+case $_LT_AC_TAGVAR(archive_cmds, $1) in
+*'~'*)
+# FIXME: we may have to deal with multi-command sequences.
+;;
+'$CC '*)
+# Test whether the compiler implicitly links with -lc since on some
+# systems, -lgcc has to come before -lc. If gcc already passes -lc
+# to ld, don't add -lc before -lgcc.
+AC_MSG_CHECKING([whether -lc should be explicitly linked in])
+$rm conftest*
+printf "$lt_simple_compile_test_code" > conftest.$ac_ext
+if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+soname=conftest
+lib=conftest
+libobjs=conftest.$ac_objext
+deplibs=
+wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
+compiler_flags=-v
+linker_flags=-v
+verstring=
+output_objdir=.
+libname=conftest
+lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=
+if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
+then
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
+else
+	  _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
+fi
+_LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+else
+cat conftest.err 1>&5
+fi
+$rm conftest*
+AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
+;;
+esac
+fi
+;;
+esac
+])# AC_LIBTOOL_PROG_LD_SHLIBS
+# _LT_AC_FILE_LTDLL_C
+# -------------------
+# Be careful that the start marker always follows a newline.
+AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
+# /* ltdll.c starts here */
+# #define WIN32_LEAN_AND_MEAN
+# #include <windows.h>
+# #undef WIN32_LEAN_AND_MEAN
+# #include <stdio.h>
+#
+# #ifndef __CYGWIN__
+# #  ifdef __CYGWIN32__
+# #    define __CYGWIN__ __CYGWIN32__
+# #  endif
+# #endif
+#
+# #ifdef __cplusplus
+# extern "C" {
+# #endif
+# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
+# #ifdef __cplusplus
+# }
+# #endif
+#
+# #ifdef __CYGWIN__
+# #include <cygwin/cygwin_dll.h>
+# DECLARE_CYGWIN_DLL( DllMain );
+# #endif
+# HINSTANCE __hDllInstance_base;
+#
+# BOOL APIENTRY
+# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
+# {
+#   __hDllInstance_base = hInst;
+#   return TRUE;
+# }
+# /* ltdll.c ends here */
+])# _LT_AC_FILE_LTDLL_C
+# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
+# ---------------------------------
+AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
+# old names
+AC_DEFUN([AM_PROG_LIBTOOL],   [AC_PROG_LIBTOOL])
+AC_DEFUN([AM_ENABLE_SHARED],  [AC_ENABLE_SHARED($@)])
+AC_DEFUN([AM_ENABLE_STATIC],  [AC_ENABLE_STATIC($@)])
+AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+AC_DEFUN([AM_PROG_LD],        [AC_PROG_LD])
+AC_DEFUN([AM_PROG_NM],        [AC_PROG_NM])
+# This is just to silence aclocal about the macro not being used
+ifelse([AC_DISABLE_FAST_INSTALL])
+AC_DEFUN([LT_AC_PROG_GCJ],
+[AC_CHECK_TOOL(GCJ, gcj, no)
+test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+AC_SUBST(GCJFLAGS)
+])
+AC_DEFUN([LT_AC_PROG_RC],
+[AC_CHECK_TOOL(RC, windres, no)
+])
+# NOTE: This macro has been submitted for inclusion into   #
+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
+#  a released version of Autoconf we should remove this    #
+#  macro and use it instead.                               #
+# LT_AC_PROG_SED
+# --------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible.  Prefer GNU sed if found.
+AC_DEFUN([LT_AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+IFS=$as_save_IFS
+test -z "$as_dir" && as_dir=.
+for lt_ac_prog in sed gsed; do
+for ac_exec_ext in '' $ac_executable_extensions; do
+if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+fi
+done
+done
+done
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+test ! -f $lt_ac_sed && break
+cat /dev/null > conftest.in
+lt_ac_count=0
+echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+# Check for GNU sed and select it if it is found.
+if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+lt_cv_path_SED=$lt_ac_sed
+break
+fi
+while true; do
+cat conftest.in conftest.in >conftest.tmp
+mv conftest.tmp conftest.in
+cp conftest.in conftest.nl
+echo >>conftest.nl
+$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+cmp -s conftest.out conftest.nl || break
+# 10000 chars as input seems more than enough
+test $lt_ac_count -gt 10 && break
+lt_ac_count=`expr $lt_ac_count + 1`
+if test $lt_ac_count -gt $lt_ac_max; then
+lt_ac_max=$lt_ac_count
+lt_cv_path_SED=$lt_ac_sed
+fi
+done
+done
+SED=$lt_cv_path_SED
+])
+AC_MSG_RESULT([$SED])
+])
+#                                                        -*- Autoconf -*-
+# Copyright (C) 2002, 2003  Free Software Foundation, Inc.
+# Generated from amversion.in; do not edit by hand.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION so it can be traced.
+# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+	 [AM_AUTOMAKE_VERSION([1.9.2])])
+# AM_AUX_DIR_EXPAND
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
+# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory.  The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run.  This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+#    fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+#    fails if $ac_aux_dir is absolute,
+#    fails when called from a subdirectory in a VPATH build with
+#          a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir.  In an in-source build this is usually
+# harmless because $srcdir is `.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
+#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+#   MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH.  The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[dnl Rely on autoconf to set up CDPATH properly.
+AC_PREREQ([2.50])dnl
+# expand $ac_aux_dir to an absolute path
+am_aux_dir=`cd $ac_aux_dir && pwd`
+])
+# AM_CONDITIONAL                                              -*- Autoconf -*-
+# Copyright (C) 1997, 2000, 2001, 2003, 2004 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 6
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ(2.52)dnl
+ifelse([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
+	[$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])
+AC_SUBST([$1_FALSE])
+if $2; then
+$1_TRUE=
+$1_FALSE='#'
+else
+$1_TRUE='#'
+$1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+# serial 7						-*- Autoconf -*-
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery.  Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "GCJ", or "OBJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
+[$1], CXX,  [depcc="$CXX"  am_compiler_list=],
+[$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+[$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
+[depcc="$$1"   am_compiler_list=])
+AC_CACHE_CHECK([dependency style of $depcc],
+[am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+# We make a subdir and do the tests there.  Otherwise we can end up
+# making bogus files that we don't know about and never remove.  For
+# instance it was reported that on HP-UX the gcc test will end up
+# making a dummy file named `D' -- because `-MD' means `put the output
+# in D'.
+mkdir conftest.dir
+# Copy depcomp to subdir because otherwise we won't find it if we're
+# using a relative directory.
+cp "$am_depcomp" conftest.dir
+cd conftest.dir
+# We will build objects and dependencies in a subdirectory because
+# it helps to detect inapplicable dependency modes.  For instance
+# both Tru64's cc and ICC support -MD to output dependencies as a
+# side effect of compilation, but ICC will put the dependencies in
+# the current directory while Tru64 will put them in the object
+# directory.
+mkdir sub
+am_cv_$1_dependencies_compiler_type=none
+if test "$am_compiler_list" = ""; then
+am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+fi
+for depmode in $am_compiler_list; do
+# Setup a source with many dependencies, because some compilers
+# like to wrap large dependency lists on column 80 (with \), and
+# we should not choose a depcomp mode which is confused by this.
+#
+# We need to recreate these files for each test, as the compiler may
+# overwrite some of them when testing with obscure command lines.
+# This happens at least with the AIX C compiler.
+: > sub/conftest.c
+for i in 1 2 3 4 5 6; do
+echo '#include "conftst'$i'.h"' >> sub/conftest.c
+# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+# Solaris 8's {/usr,}/bin/sh.
+touch sub/conftst$i.h
+done
+echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+case $depmode in
+nosideeffect)
+# after this tag, mechanisms are not by side-effect, so they'll
+# only be used when explicitly requested
+if test "x$enable_dependency_tracking" = xyes; then
+	continue
+else
+	break
+fi
+;;
+none) break ;;
+esac
+# We check with `-c' and `-o' for the sake of the "dashmstdout"
+# mode.  It turns out that the SunPro C++ compiler does not properly
+# handle `-M -o', and we need to detect this.
+if depmode=$depmode \
+source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
+depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
+>/dev/null 2>conftest.err &&
+grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
+${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+# icc doesn't choke on unknown options, it will just issue warnings
+# or remarks (even with -Werror).  So we grep stderr for any message
+# that says an option was ignored or not supported.
+# When given -MP, icc 7.0 and 7.1 complain thusly:
+#   icc: Command line warning: ignoring option '-M'; no argument required
+# The diagnosis changed in icc 8.0:
+#   icc: Command line remark: option '-MP' not supported
+if (grep 'ignoring option' conftest.err ||
+grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+am_cv_$1_dependencies_compiler_type=$depmode
+break
+fi
+fi
+done
+cd ..
+rm -rf conftest.dir
+else
+am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+test "x$enable_dependency_tracking" != xno \
+&& test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE(dependency-tracking,
+[  --disable-dependency-tracking  speeds up one-time build
+--enable-dependency-tracking   do not reject slow dependency extractors])
+if test "x$enable_dependency_tracking" != xno; then
+am_depcomp="$ac_aux_dir/depcomp"
+AMDEPBACKSLASH='\'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])
+])
+# Generate code to set up dependency tracking.   -*- Autoconf -*-
+# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004
+#   Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+#serial 2
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[for mf in $CONFIG_FILES; do
+# Strip MF so we end up with the name of the file.
+mf=`echo "$mf" | sed -e 's/:.*$//'`
+# Check whether this is an Automake generated Makefile or not.
+# We used to match only the files named `Makefile.in', but
+# some people rename them; so instead we look at the file content.
+# Grep'ing the first line is not enough: some people post-process
+# each Makefile.in and add a new line on top of each file to say so.
+# So let's grep whole file.
+if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
+dirpart=`AS_DIRNAME("$mf")`
+else
+continue
+fi
+# Extract the definition of DEPDIR, am__include, and am__quote
+# from the Makefile without running `make'.
+DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
+test -z "$DEPDIR" && continue
+am__include=`sed -n 's/^am__include = //p' < "$mf"`
+test -z "am__include" && continue
+am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
+# When using ansi2knr, U may be empty or an underscore; expand it
+U=`sed -n 's/^U = //p' < "$mf"`
+# Find all dependency output files, they are included files with
+# $(DEPDIR) in their names.  We invoke sed twice because it is the
+# simplest approach to changing $(DEPDIR) to its actual value in the
+# expansion.
+for file in `sed -n "
+s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
+sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
+# Make sure the directory exists.
+test -f "$dirpart/$file" && continue
+fdir=`AS_DIRNAME(["$file"])`
+AS_MKDIR_P([$dirpart/$fdir])
+# echo "creating $dirpart/$file"
+echo '# dummy' > "$dirpart/$file"
+done
+done
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking
+# is enabled.  FIXME.  This creates each `.P' file that we will
+# need in order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
+])
+# Like AC_CONFIG_HEADER, but automatically create stamp file. -*- Autoconf -*-
+# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 7
+# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
+AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
+# Do all the work for Automake.                            -*- Autoconf -*-
+# This macro actually does too much some checks are only needed if
+# your package does certain things.  But this isn't really a big deal.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+# Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 11
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out.  PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition.  After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.58])dnl
+dnl Autoconf wants to disallow AM_ names.  We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+# test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" &&
+test -f $srcdir/config.status; then
+AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+if (cygpath --version) >/dev/null 2>/dev/null; then
+CYGPATH_W='cygpath -w'
+else
+CYGPATH_W=echo
+fi
+fi
+AC_SUBST([CYGPATH_W])
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+AC_SUBST([PACKAGE], [$1])dnl
+AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
+AM_MISSING_PROG(AUTOCONF, autoconf)
+AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
+AM_MISSING_PROG(AUTOHEADER, autoheader)
+AM_MISSING_PROG(MAKEINFO, makeinfo)
+AM_PROG_INSTALL_SH
+AM_PROG_INSTALL_STRIP
+AC_REQUIRE([AM_PROG_MKDIR_P])dnl
+# We need awk for the "check" target.  The system "awk" is bad on
+# some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+[_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+	      		     [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+[_AM_DEPENDENCIES(CC)],
+[define([AC_PROG_CC],
+defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+[_AM_DEPENDENCIES(CXX)],
+[define([AC_PROG_CXX],
+defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
+])
+])
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated.  The stamp files are numbered to have different names.
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+case $_am_header in
+$1 | $1:* )
+break ;;
+* )
+_am_stamp_count=`expr $_am_stamp_count + 1` ;;
+esac
+done
+echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+install_sh=${install_sh-"$am_aux_dir/install-sh"}
+AC_SUBST(install_sh)])
+#                                                          -*- Autoconf -*-
+# Copyright (C) 2003  Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 1
+# Check whether the underlying file-system supports filenames
+# with a leading dot.  For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+am__leading_dot=.
+else
+am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+# Check to see how 'make' treats includes.	-*- Autoconf -*-
+# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 2
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check to see how make treats includes.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[am_make=${MAKE-make}
+cat > confinc << 'END'
+am__doit:
+	@echo done
+.PHONY: am__doit
+END
+# If we don't find an include directive, just comment out the code.
+AC_MSG_CHECKING([for style of include used by $am_make])
+am__include="#"
+am__quote=
+_am_result=none
+# First try GNU make style include.
+echo "include confinc" > confmf
+# We grep out `Entering directory' and `Leaving directory'
+# messages which can occur if `w' ends up in MAKEFLAGS.
+# In particular we don't look at `^make:' because GNU make might
+# be invoked under some other name (usually "gmake"), in which
+# case it prints its new name instead of `make'.
+if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
+am__include=include
+am__quote=
+_am_result=GNU
+fi
+# Now try BSD make style include.
+if test "$am__include" = "#"; then
+echo '.include "confinc"' > confmf
+if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
+am__include=.include
+am__quote="\""
+_am_result=BSD
+fi
+fi
+AC_SUBST([am__include])
+AC_SUBST([am__quote])
+AC_MSG_RESULT([$_am_result])
+rm -f confinc confmf
+])
+#  -*- Autoconf -*-
+# Copyright (C) 1997, 1999, 2000, 2001, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 3
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it supports --run.
+# If it does, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
+# Use eval to expand $SHELL
+if eval "$MISSING --run true"; then
+am_missing_run="$MISSING --run "
+else
+am_missing_run=
+AC_MSG_WARN([`missing' script is too old or missing])
+fi
+])
+# AM_PROG_MKDIR_P
+# ---------------
+# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
+# Copyright (C) 2003, 2004 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
+# created by `make install' are always world readable, even if the
+# installer happens to have an overly restrictive umask (e.g. 077).
+# This was a mistake.  There are at least two reasons why we must not
+# use `-m 0755':
+#   - it causes special bits like SGID to be ignored,
+#   - it may be too restrictive (some setups expect 775 directories).
+#
+# Do not use -m 0755 and let people choose whatever they expect by
+# setting umask.
+#
+# We cannot accept any implementation of `mkdir' that recognizes `-p'.
+# Some implementations (such as Solaris 8's) are not thread-safe: if a
+# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
+# concurrently, both version can detect that a/ is missing, but only
+# one can create it and the other will error out.  Consequently we
+# restrict ourselves to GNU make (using the --version option ensures
+# this.)
+AC_DEFUN([AM_PROG_MKDIR_P],
+[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
+# We used to keeping the `.' as first argument, in order to
+# allow $(mkdir_p) to be used without argument.  As in
+#   $(mkdir_p) $(somedir)
+# where $(somedir) is conditionally defined.  However this is wrong
+# for two reasons:
+#  1. if the package is installed by a user who cannot write `.'
+#     make install will fail,
+#  2. the above comment should most certainly read
+#     $(mkdir_p) $(DESTDIR)$(somedir)
+#     so it does not work when $(somedir) is undefined and
+#     $(DESTDIR) is not.
+#  To support the latter case, we have to write
+#     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
+#  so the `.' trick is pointless.
+mkdir_p='mkdir -p --'
+else
+# On NextStep and OpenStep, the `mkdir' command does not
+# recognize any option.  It will interpret all options as
+# directories to create, and then abort because `.' already
+# exists.
+for d in ./-p ./--version;
+do
+test -d $d && rmdir $d
+done
+# $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
+if test -f "$ac_aux_dir/mkinstalldirs"; then
+mkdir_p='$(mkinstalldirs)'
+else
+mkdir_p='$(install_sh) -d'
+fi
+fi
+AC_SUBST([mkdir_p])])
+# Helper functions for option handling.                    -*- Autoconf -*-
+# Copyright (C) 2001, 2002, 2003  Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 2
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+# _AM_SET_OPTION(NAME)
+# ------------------------------
+# Set option NAME.  Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
+# _AM_SET_OPTIONS(OPTIONS)
+# ----------------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+#
+# Check to make sure that the build environment is sane.
+#
+# Copyright (C) 1996, 1997, 2000, 2001, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 3
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftest.file
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments.  Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
+if test "$[*]" = "X"; then
+# -L didn't work.
+set X `ls -t $srcdir/configure conftest.file`
+fi
+rm -f conftest.file
+if test "$[*]" != "X $srcdir/configure conftest.file" \
+&& test "$[*]" != "X conftest.file $srcdir/configure"; then
+# If neither matched, then we have a broken ls.  This can happen
+# if, for instance, CONFIG_SHELL is bash and it inherits a
+# broken ls alias from the environment.  This has actually
+# happened.  Such a system could not be considered "sane".
+AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
+alias in your environment])
+fi
+test "$[2]" = conftest.file
+)
+then
+# Ok.
+:
+else
+AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT(yes)])
+# AM_PROG_INSTALL_STRIP
+# Copyright (C) 2001, 2003 Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# One issue with vendor `install' (even GNU) is that you can't
+# specify the program used to strip binaries.  This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in `make install-strip', and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using `strip' when the user
+# run `make install-strip'.  However `strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the `STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
+if test "$cross_compiling" != no; then
+AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+# Check how to create a tarball.                            -*- Autoconf -*-
+# Copyright (C) 2004  Free Software Foundation, Inc.
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
+# 02111-1307, USA.
+# serial 1
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of `v7', `ustar', or `pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+#     tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+#     $(am__untar) < result.tar
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility.
+AM_MISSING_PROG([AMTAR], [tar])
+m4_if([$1], [v7],
+[am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
+[m4_case([$1], [ustar],, [pax],,
+[m4_fatal([Unknown tar format])])
+AC_MSG_CHECKING([how to create a $1 tar archive])
+# Loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+_am_tools=${am_cv_prog_tar_$1-$_am_tools}
+# Do not fold the above two line into one, because Tru64 sh and
+# Solaris sh will not grok spaces in the rhs of `-'.
+for _am_tool in $_am_tools
+do
+case $_am_tool in
+gnutar)
+for _am_tar in tar gnutar gtar;
+do
+AM_RUN_LOG([$_am_tar --version]) && break
+done
+am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+am__untar="$_am_tar -xf -"
+;;
+plaintar)
+# Must skip GNU tar: if it does not support --format= it doesn't create
+# ustar tarball either.
+(tar --version) >/dev/null 2>&1 && continue
+am__tar='tar chf - "$$tardir"'
+am__tar_='tar chf - "$tardir"'
+am__untar='tar xf -'
+;;
+pax)
+am__tar='pax -L -x $1 -w "$$tardir"'
+am__tar_='pax -L -x $1 -w "$tardir"'
+am__untar='pax -r'
+;;
+cpio)
+am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+am__untar='cpio -i -H $1 -d'
+;;
+none)
+am__tar=false
+am__tar_=false
+am__untar=false
+;;
+esac
+# If the value was cached, stop now.  We just wanted to have am__tar
+# and am__untar set.
+test -n "${am_cv_prog_tar_$1}" && break
+# tar/untar a dummy directory, and stop if the command works
+rm -rf conftest.dir
+mkdir conftest.dir
+echo GrepMe > conftest.dir/file
+AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+rm -rf conftest.dir
+if test -s conftest.tar; then
+AM_RUN_LOG([$am__untar <conftest.tar])
+grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+fi
+done
+rm -rf conftest.dir
+AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR

Mercurial > syslog2iptables

comparison aclocal.m4 @ 1:551433a01cab